Lets talk mellow, conservative but a bit louder 5.0 Exhaust
#41
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Borla on a 5.0 always sounds good!
#42
Canuck
#43
Thanks @I'm Broken I think my exhaust sounds perfect and with minimal cost. Borla XR-1 40085 muffler swap and a 12" turn down behind the axle. Zero drone and whisper quiet at cruising speeds. But at WOT, people know you have a V8. Total cost of around $220 because I got the Borla cheap ($75) and had a top-notch shop install it and the black turn down tip was $15 on Amazon.
The following users liked this post:
I'm Broken (12-27-2018)
#45
Senior Member
The drone was pretty bad at hwy speeds with the magnaflow.
The following users liked this post:
2chains (12-27-2018)
#48
Senior Member
I'm curious, what are your guys RPM's at highway speeds? I'm turning 2000 RPM at 70-75 mph and I can hear some sound from the muffler but not any drone in that range. There is a little resonance in the 1600-1800 RPM range though. Before I added the insert it was most annoying driving around town, not on the highway since most of the time at lower speeds you're in that RPM range. I've found the same to be true with my Mustang.
#49
Senior Member
I did a Flowmaster 40 1 in 2 out on my 2018 5.0. Much quieter then the super 44 I had on my Ram but still has a great throaty sound. Completely silent in 10th gear cruising.
#50
Senior Member
I'm curious, what are your guys RPM's at highway speeds? I'm turning 2000 RPM at 70-75 mph and I can hear some sound from the muffler but not any drone in that range. There is a little resonance in the 1600-1800 RPM range though. Before I added the insert it was most annoying driving around town, not on the highway since most of the time at lower speeds you're in that RPM range. I've found the same to be true with my Mustang.