Let's see some supercabs.
#112
The following users liked this post:
rangerrick (05-03-2018)
#117
Senior Member
Great! This is the second 6" RC lift I've installed (first kit was on my '13 4x2 approx 3 months ago) and it took me about 8 hours to install by myself. I borrowed a bay / lift at a buddies truck shop which, obviously, made it WAY easier having the proper set up instead of on my back in the driveway (which is very doable, just not fun at all). The ride is feels just a tad firmer than OEM but I suspect that's because of the strut spacers preloading the springs in the front a little bit. I'd like to eventually upgrade to either Bilstein 5100's all around like on my '13 or go with Fox coilovers for a better ride. Also, I'm running 35x12.50 with a -19 offset and I'm not rubbing on anything nor did I have to modify the crash bars whatsoever. For comparison of this kit to others, I have a friend that has a '16 with the 3.5TT and a 6" Pro Comp lift and this RC lift sits over 1" taller in the front and 1/4" taller in the rear and my control arm relocation brackets in the front are curved up in the middle for higher ground clearance in the center where most others are straight across, so keep that in mind if you're shopping for a kit that not all of them are created equal even though they all mostly utilize the same basic design. Also they were able to get the alignment within factory specs so there's no additional tire wear. Overall for the money (I paid $999.99 shipped and got it within 3 days) I would highly recommend this kit for someone looking for a 6" lift or as in my case a great platform to build off of. If anyone has any other questions about lifting your truck or my experience with this RC lift please feel free to PM me!
The following 2 users liked this post by Pyroman_28:
JDMCyclone3.5F150_ML (05-05-2018),
Phil48315 (05-05-2018)
The following users liked this post:
bambbrose (05-21-2018)
#119
Super Moderator
Nice truck !
And nice antlers......were you hunting sheds ?
And nice antlers......were you hunting sheds ?