When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got this console from an online salvage yard. It's from a 2015 Lariat. It was originally for a truck with floor shifter. I have a column shift. Does anybody know the part number to fill the hole where the shifter was?
Should be FL3Z1504567DA. I just completed my swap a month ago.
Thanks! I ordered FL3Z-19A090-AA from Tasca but I told was way to big. Also does I think just fit into the hole? From the looks the plastic part that has the gears displayed is molded into the whole bezel.
My truck has the basic sync ( only one USB port) the console has a wiring harness with a plug that I did not find behind the dash. The connect to my sync USB doesn't not connect to the consoles data ports. The console ports seem to have a mini USB port. Anybody know how to make everything in my console fully operational? Do I need a new harness adapter? I plugged the consoles harness into the original harness from the jump seat and I do not have power anywhere. BTW I made the rear vents functional with pieces ordered from Tasca
Thanks! I ordered FL3Z-19A090-AA from Tasca but I told was way to big. Also does I think just fit into the hole? From the looks the plastic part that has the gears displayed is molded into the whole bezel.
Its not molded into the bezel. The silver trim piece on top comes off and the shifter bezel and cup holders are one piece. The part I mentioned replaces both sides. I got everything working on mine except the console lights and inverter.
09-07-2017, 08:26 AM
Help needed with center console swap into XLT
