NoRice

Yes but on stock wheels... My issue will be the 0 offset wheels I'm putting on.

neck5150

You're right sir.

The 0 offset will rub the crash bars, maybe only in reverse, maybe only in reverse one direction or maybe a little bit all the time.

I had 275/65s on a stock wheel (+44) with spacers that made it an effective 0 offset and it rubbed the crash bars when in reverse. (How immature is it that I edited this sentence to include enough detail that I wasn't just saying "it rubbed in reverse")

W Coyne

Gotcha, I had the same problem with my 2011. The 305 55 20 cleared with stock but rubbed with 0 offset bmf wheels. I am having 285 65 20 bfg tires installed right now on a +20 backspacing wheel with 2.5 level

NoRice

Think I'd have a problem with 285 60?

W Coyne

That might work. That's only .3" taller and it's .7 skinnier than the 305 55

W Coyne

285/65-20 fits with 2.5 level and 20x9 +20 backspacing with no rub and I didn't have too cut anything. I am not sure how much difference a 0 offset is from +20 backspacing

NoRice

Well I can confirm that 285 60R20 duratracs DO NOT FIT with 20x9 0 offset 5" backspacing wheels on a truck with a 2.25 ready lift level. They rubbed the front crash bar and were super close to the rear plastic.

Sucks because they looked awesome on my truck...

On to try 295 55r20 Toyo AT2's Saturday....

THRSTE-ECO

Did you at least get a picture of how it looked?

NoRice

No I didn't, was to depressed to think about it plus I don't want to see it again..

Caloosa Kid

305-55-20 Nitto Terra Graplers on stock rims. No rubbing. 2" AS lift kit.