FORScan - software to enable/disable features in your truck
#8981
Senior Member
Well i took a stab at this today, and found the bcm plug for pin 40. Confirmed it sends 12v when enabled. Question is though, has anyone found a combination that will send the pin40 voltage but with the low beams disabled? I tried all the codes listed and multiple variations and could not find a combo that sent me 12v on pin 40 but did not light up the low beams.
726-50-01 40BE is DRL - Low Beams and Dedicated DRL. Which is the outputs at pins 36 & 40.
So you want to use the signal from one of the pins to trip your front sensor on when you take the truck out of Park, and your low beams come on as DRL, correct? Good idea. Report back if that works.
Edit: I see you don't want the low beam DRLs. Did you try 108E instead of the above? That should be the dedicated DRLs only. You need to have the 7F value at 726-45-01 set also for any of these to work.
Last edited by carrierj; 06-13-2017 at 09:57 PM.
#8982
It looks like the value at:
726-50-01 40BE is DRL - Low Beams and Dedicated DRL. Which is the outputs at pins 36 & 40.
So you want to use the signal from one of the pins to trip your front sensor on when you take the truck out of Park, and your low beams come on as DRL, correct? Good idea. Report back if that works.
Edit: I see you don't want the low beam DRLs. Did you try 108E instead of the above? That should be the dedicated DRLs only. You need to have the 7F value at 726-45-01 set also for any of these to work.
726-50-01 40BE is DRL - Low Beams and Dedicated DRL. Which is the outputs at pins 36 & 40.
So you want to use the signal from one of the pins to trip your front sensor on when you take the truck out of Park, and your low beams come on as DRL, correct? Good idea. Report back if that works.
Edit: I see you don't want the low beam DRLs. Did you try 108E instead of the above? That should be the dedicated DRLs only. You need to have the 7F value at 726-45-01 set also for any of these to work.
#8983
The FORScan Guy
Thread Starter
deleted
Last edited by Livnitup; 06-13-2017 at 10:35 PM.
#8984
Senior Member
iTrader: (1)
Congratulations, this is now the biggest thread on this entire website and perhaps the largest Ford related thread of all time.
Big shout out to all the Ford employees who read this and never post anything. This thread has 1.2M views and I already personally know some of you Ford guys on here who've contributed to that view-but-never-post count. I'm hoping some day you guys will throw some Easter eggs into the programming for us that you can sneak under the radar of DOT and upper management. Sort of like 1996's Sim Copter but (literally) less gay lol.
Big shout out to all the Ford employees who read this and never post anything. This thread has 1.2M views and I already personally know some of you Ford guys on here who've contributed to that view-but-never-post count. I'm hoping some day you guys will throw some Easter eggs into the programming for us that you can sneak under the radar of DOT and upper management. Sort of like 1996's Sim Copter but (literally) less gay lol.
Big shout-out to the Ford employees who wish they could post but can't because company policies don't allow. But they do give us software and systems that challenge us but don't really hold us back from unleashing for pennies what would otherwise cost us dollars or not be offered.
FORD stands for Free Or Reduced Drastically, and that is what this thread is all about - get the features free or drastically reduced.
We resume our normal programming, which for me is adding APA. Inside done now for the outside work.
#8985
It's my first day
Originally Posted by BarmanBean
Annoying double honk is gone and my mirrors now fold on their own, awesome!
#8986
Senile member
Is there a way to activate automatic climate control in an XL/XLT? I have the feature on the climate buttons I activated on sync3 but I have the manual dials. I suspect I have to have a different climate control module to do so? OR is there something in the software that can activate it?
#8987
Senior Member
Is there a way to activate automatic climate control in an XL/XLT? I have the feature on the climate buttons I activated on sync3 but I have the manual dials. I suspect I have to have a different climate control module to do so? OR is there something in the software that can activate it?
Last edited by lucas8888; 06-14-2017 at 08:19 AM.
The following users liked this post:
chimmike (06-14-2017)