^^ this. I would've been pissed off and left if they didn't order the new antenna.

 

I wasn't pissed, but I had to leave no matter what. Had to get to work.

I have played their game, drove through the area where the signal cuts out and it still cuts out.

Now they will have to order the part and fix the issue based on the SSM.

Then I can gloat.

But all this is going way off topic for this thread and it is my fault. Sorry.

Back on topic.

Whatever the tech did, it did reset my power points to factory, but not the double honk or door ajar chimes.

 

Going through the spreadsheet this morning and apologize if I missed it in the thread: what is a "Powerpoint timeout"?

Is it possible to get a bit more detailed descriptions on the options (possibly community effort if hosted on google docs) to know what some of the options offer?

Otherwise, thanks for all the hard work!

 

The powerpoint timeout is the amount of time that your 12v accessory connection stays on after you have turned off the ignition. Livnitup and a couple of others (sorry can't remember who all at the moment) did extensive testing to change the time frame that the 12v port was energized.

 

Powerpoint timeout is the time after shutting off vehicle that the 12V cigarette lighter adapter stays on.

 

Posted this a few days ago and did not get a response, though maybe it was over looked.

Hey guys

Have been fooling around with changing the basic things. Very cool, thanks to all that have contributed

I have read tons of pages and did a search but could not find any info

I am wondering if anyone has been able to figure out how to change the fuel history to less than 30 minutes. In my 2014 you could change it.

Also curious if anyone figured out the tail gate ajar warning?
__________________

 

Nothing found on the fuel history but I didn't know that was an option on previous years and never tested for it. As far as the tailgate ajar warning...can you pm me your VIN because I may have something for you to try. Apparently they stopped putting the switch in the tailgate after a certain date of mfg because of so many problems with it and my own 2016 doesn't have the switch so I can't test for it.

 

How many of you guys are havin tons of DTC's show up when you access forscan?

APIM:
U0198
U3000

PAM:
U0131

FCIM:
U0155
U0253
U0401
U0452

ALSO, my door chimes are no longer coming through the speakers. I check the value in the IPC and it is correct. The only things I changed were double honk, highlight menu colors, quantum logic, heated and cooled seats to the climate screen. Any suggestions?

Thank you!

 

These DTCs come back each time even if you clear DTCs? Also, the quantum logic thing was just an observation I noticed trying different values but I'm not sure of any additional functionality by having it enabled. Try putting that one back to normal, clear DTCs and see if the APIM DTCs come back again?

 

Any time I write to any of the modules, I get a DTC or two. I clear them and they stay gone until the next time I make a change.