FORScan - software to enable/disable features in your truck
Senior Member
Choose one of the BCM values here and program that: https://docs.google.com/spreadsheets...#gid=110328400
Then in FORScan run a PCM relearn in the programming screen followed up by a TCM relearn in the same area.
Then in FORScan run a PCM relearn in the programming screen followed up by a TCM relearn in the same area.
Frelling idiot member
It's my first day
FYI.
It is possible to get the XLT FCIM fan **** to work with a Sync 3 conversion / retrofit. I did it at the start of the month and forgot to post an update here. Be sure to press and hold power and seek forward for 10 seconds after making any APIM changes in ForScan to power reset the unit so the new settings can take full effect.
Testing any setting changes made with ForScan in the APIM module without first power-resetting the APIM may get overlooked or be dismissed as non-functional-edits when that's not the case.
FCIM:
7A7-01-01 xx3x xxxx xxxx
APIM:
7D0-01-01 xxxx xxx6 xxxx (reference spread sheet for your radio type).
7D0-01-02 xxxx x6xx xxxx
7D0-04-01 xxxx xxx2 xxxx
Video for visual reference (2017 300a F150 after base audio package to Sync 3 conversion).
It is possible to get the XLT FCIM fan **** to work with a Sync 3 conversion / retrofit. I did it at the start of the month and forgot to post an update here. Be sure to press and hold power and seek forward for 10 seconds after making any APIM changes in ForScan to power reset the unit so the new settings can take full effect.
Testing any setting changes made with ForScan in the APIM module without first power-resetting the APIM may get overlooked or be dismissed as non-functional-edits when that's not the case.
FCIM:
7A7-01-01 xx3x xxxx xxxx
APIM:
7D0-01-01 xxxx xxx6 xxxx (reference spread sheet for your radio type).
7D0-01-02 xxxx x6xx xxxx
7D0-04-01 xxxx xxx2 xxxx
Video for visual reference (2017 300a F150 after base audio package to Sync 3 conversion).
Last edited by Airborne_Ape; 06-25-2019 at 02:51 PM.
Is there any reliable way to add or program for the Elocker? I went from an 8.8 rear to a 9.75 with the locker. I’d like to able to run the locker at a moments notice, whether in 2wd or 4wd. Is anything possible on the computer side and wiring side to facilitate the change?
Senior Member
Just wanted to post a Thank You to everyone that has been updating and answering questions on this. I’ve done a few simple things such as 5 turn signal flashes. Speedo updste for tire change, stopping some of chimes and turning off the honk when pressing lock a second time. All have been through easy to follow spreadsheet instructions.
Its pretty cool,to,be able to make simple changes that really should be accessible to everyone. And now are through many of your efforts.
Its pretty cool,to,be able to make simple changes that really should be accessible to everyone. And now are through many of your efforts.
Senior Member
1 - Thanks for this fantastic guide! Last night i finally made some sweet changes to my F150 - got rid of chimes, added the comfort close / open, added the fast boot.
2 - Do these adjustments apply to the F250's as well? or just the F150 series Trucks?
2 - Do these adjustments apply to the F250's as well? or just the F150 series Trucks?
Senior Member
There is a separate spreadsheet for Super Dutys, but yes you can do some of the same changes.