FORScan - software to enable/disable features in your truck
The FORScan Guy
Thread Starter
Hello to all - So I guess I'm the newest guy to Forscan....I have registered for Forscan but have yet to download the software. Question - if I make changes and such, does this in anyway void a warranty? I have an 18 Plat I bought as a CPO and want to do a few things but sure don't want to get bent over later down the line. Appreciate some input.
Senior Member
Nobody has had their warranty voided by using FORScan and none of the changes will cause damage to any of the modules in the truck. If you need to take your truck in for service you can quickly revert all your changes to the factory values with the backups you should make before you make any changes.
The FORScan Guy
Thread Starter
Then in FORScan run a PCM relearn in the programming screen followed up by a TCM relearn in the same area.
The FORScan Guy
Thread Starter
Frelling idiot member
Member
iTrader: (1)
Just made some changes for the first time yesterday and man that's so cool! Not having auto-folding mirrors was silly but now I have them along with fog lights during high beams, turn signal mod (3 up to 5), visible temps, heated/cooled seat buttons on screen and no more double honks. Thanks to those who burn the midnight oil to figure these things out! I'm starting to like my truck again. Now if there were only a 10sd to 6spd conversion.
Senior Member
Is there a FORScan mod for the flow through console light to go off? The one up front with the spring loaded door stays on all the time in my truck and I’m worried about battery drain.
Senior Member
Just made some changes for the first time yesterday and man that's so cool! Not having auto-folding mirrors was silly but now I have them along with fog lights during high beams, turn signal mod (3 up to 5), visible temps, heated/cooled seat buttons on screen and no more double honks. Thanks to those who burn the midnight oil to figure these things out! I'm starting to like my truck again. Now if there were only a 10sd to 6spd conversion.
Mike
The following users liked this post:
DCM (06-25-2019)