FORScan - software to enable/disable features in your truck
LONG TIME FORD GUY
Joined: Aug 2012
Posts: 882
Likes: 136
From: Lemoore, CA
Hi, I think Ford can change the lines. I had them put in this code". They showed me what was in my truck and the first line in the picture attached was not at all the same, at all. I had them delete my code and put this code in, and it's entirety.
Attached Thumbnails
Sp what did this change for those of us that don't read ford code like a savant
Attached Thumbnails
Sp what did this change for those of us that don't read ford code like a savant
Last edited by Texrep; Aug 3, 2016 at 12:16 AM.
The Source
Joined: Jul 2016
Posts: 403
Likes: 247
From: New England, USA
Ford's DRL Type Options:
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
Last edited by DanMc85; Aug 3, 2016 at 12:42 AM.
Here is a contribution that I discovered comparing European/Asian Ford vehicle info, enjoy... if someone would like to test it out.
(Works in my 2014 Fusion)
Change the middle box to all 0000's.
BdyCM
726-27-01 0100 0001 01xx - HB Only
726-27-01 0100 0000 01xx - HB & Fog Simultaneously
This will allow Foglights and High Beams on at the same time
Works with Auto High Beams (if equipped)
DON'T BLIND ANYONE lol
Another option... changing the middle box to 0100 will allow fogs at the same time, but also fog lights will be disabled when headlights are turned on every key cycle.
Thus they have to be manually enabled every time you drive, but will also stay on with high beams.
(Works in my 2014 Fusion)
Change the middle box to all 0000's.
BdyCM
726-27-01 0100 0001 01xx - HB Only
726-27-01 0100 0000 01xx - HB & Fog Simultaneously
This will allow Foglights and High Beams on at the same time
Works with Auto High Beams (if equipped)
DON'T BLIND ANYONE lol
Another option... changing the middle box to 0100 will allow fogs at the same time, but also fog lights will be disabled when headlights are turned on every key cycle.
Thus they have to be manually enabled every time you drive, but will also stay on with high beams.
Senior Member
Joined: Jul 2015
Posts: 258
Likes: 31
From: Cayman Islands....I live where you vacation
Ford's DRL Type Options:
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd about this)
BdyCM
726-50-01
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd about this)
BdyCM
726-50-01
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
My current value is 726-50-01 017F - Disabled
Going do some testing tomorrow!! Thanks DanMc85!
BCM Module:
726-27-01 xxxx xxx0 xxxx - High beams and fogs work *
726-27-01 xxxx x1xx xxxx - High beams and fogs work **
726-27-01 xxxx xxx0 x1xx - High beams and fogs work ***
The following explanations are with switch left in Auto position:
* fogs' on/off status is remembered from previous time with key off/on
** neither hb nor fogs' on/off status from previous time remembered with key off/on
*** both hb & fogs' on/off status remembered from previous time with key off/on
726-27-01 xxxx xxx0 xxxx - High beams and fogs work *
726-27-01 xxxx x1xx xxxx - High beams and fogs work **
726-27-01 xxxx xxx0 x1xx - High beams and fogs work ***
The following explanations are with switch left in Auto position:
* fogs' on/off status is remembered from previous time with key off/on
** neither hb nor fogs' on/off status from previous time remembered with key off/on
*** both hb & fogs' on/off status remembered from previous time with key off/on
The Source
Joined: Jul 2016
Posts: 403
Likes: 247
From: New England, USA
You're welcome... enjoy.
Senior Member
Joined: Jul 2015
Posts: 258
Likes: 31
From: Cayman Islands....I live where you vacation
Ford's DRL Type Options:
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
Would have liked to use my fogs as DRLs. But I'm am happy I got my DRLs to work.
Last edited by Khislop007; Aug 3, 2016 at 02:14 AM.
