FORScan - software to enable/disable features in your truck
It's my first day
Originally Posted by icecoldak
I get my Icon when I step on the brake hard enough at a stop--but it does not shut off!
Your truck will always display that icon whenever auto stop start can't normally engage, that is, until you remove the auto stop start features from the dash (IPC).
Last edited by Airborne_Ape; 07-12-2018 at 04:15 PM.
Senior Member
I don't understand what you're getting at. Is it supposed to be a complaint? because that's how our Fords normally work. The icon appears to inform the driver that the engine is still running because all the conditions for auto stop start to engage haven't been met. It will display if you disable any auto stop start condition (for example that one in the BCM you attempted to set manually), just as it can display for 50 separate other reasons like battery charge too low, steering angle to wide, engine temp too cold... ect. You can look up each Auto Stop Start conditional PID in the ForScan diagnostics section.
Your truck will always display that icon whenever auto stop start can't normally engage, that is, until you remove the auto stop start features from the dash (IPC).
Your truck will always display that icon whenever auto stop start can't normally engage, that is, until you remove the auto stop start features from the dash (IPC).
Member
No never heard of it! I think maybe you forgot to hit the "Write" button then Stop button when done---all you need is that one line you posted, should be good to go! I still get my icon on the screen because I only did the One line as well, but my truck has not ever shut off till I shut it off! Try again!
Senior Member
If you want to disable start/stop and remove the icons, warning ect then there is actually three lines that need changed.BCM726-48-02x0xxxxxxxxxxFCIM7A7-01-01xxxxx0xxxxxx(optional - disables switch)IPC720-01-01xxxx1xxxxxxx(optional - disables stop/start message center in the trip/fuel IPC menu)
Quite a while ago, I used FORScan to change my Sync color theme to the Lincoln brown theme. I want to revert back to the original settings, but unfortunately I recently replaced my laptop and lost both my backup and notes on what I changed. Looking at the FORScan spreadhseet it looks like I need to make the following changes under APIM to get back.
7D0-01-02 - 0xxx xxxx xxxx - Brand: Ford
7D0-03-01 - xxxx x0xx xxxx - Visual Design Variant: Ford Classic
What I am not sure about is the value for 7D0-02-01, I changed it to xxxx x3xx xxxx which is Lincoln black label boot screen animation. There are numerous values given in the spreadsheet, but not the stock value. Does anyone have the stock value? Also can anyone verify that the other values are the correct stock values? Any assistance would be appreciated.
7D0-01-02 - 0xxx xxxx xxxx - Brand: Ford
7D0-03-01 - xxxx x0xx xxxx - Visual Design Variant: Ford Classic
What I am not sure about is the value for 7D0-02-01, I changed it to xxxx x3xx xxxx which is Lincoln black label boot screen animation. There are numerous values given in the spreadsheet, but not the stock value. Does anyone have the stock value? Also can anyone verify that the other values are the correct stock values? Any assistance would be appreciated.
Senior Member
iTrader: (1)
Quite a while ago, I used FORScan to change my Sync color theme to the Lincoln brown theme. I want to revert back to the original settings, but unfortunately I recently replaced my laptop and lost both my backup and notes on what I changed. Looking at the FORScan spreadhseet it looks like I need to make the following changes under APIM to get back.
7D0-01-02 - 0xxx xxxx xxxx - Brand: Ford
7D0-03-01 - xxxx x0xx xxxx - Visual Design Variant: Ford Classic
What I am not sure about is the value for 7D0-02-01, I changed it to xxxx x3xx xxxx which is Lincoln black label boot screen animation. There are numerous values given in the spreadsheet, but not the stock value. Does anyone have the stock value? Also can anyone verify that the other values are the correct stock values? Any assistance would be appreciated.
7D0-01-02 - 0xxx xxxx xxxx - Brand: Ford
7D0-03-01 - xxxx x0xx xxxx - Visual Design Variant: Ford Classic
What I am not sure about is the value for 7D0-02-01, I changed it to xxxx x3xx xxxx which is Lincoln black label boot screen animation. There are numerous values given in the spreadsheet, but not the stock value. Does anyone have the stock value? Also can anyone verify that the other values are the correct stock values? Any assistance would be appreciated.
The following users liked this post:
rritch (07-14-2018)
Senior Member
iTrader: (1)
Strange thing while looking at this module for rrich under the easy settings it says my animated volume is off. I have the circle that pops up when adjusting the volune, is that the animation or is there something else?
Senior Member
iTrader: (7)
Curious what this animation volume is all about. Please do inform the uninformed.
Senior Member
iTrader: (1)
Senior Member
iTrader: (7)