FORScan - software to enable/disable features in your truck
04-10-2018, 10:23 AM
Senior Member
Many Thanks!!
I have tried the master reset and this did not work. I called Sirius again and they tried refreshing the signal but did not work either. So they mention for me to visit the dealer again.
So i will try to change the settings in Forscan and see what happens. I'm just curious if the issue lies in the programming of the NAV itself in the APIM.
I have tried the master reset and this did not work. I called Sirius again and they tried refreshing the signal but did not work either. So they mention for me to visit the dealer again.
So i will try to change the settings in Forscan and see what happens. I'm just curious if the issue lies in the programming of the NAV itself in the APIM.
04-10-2018, 05:01 PM
727-04-01 xxxx x*xx xxxx SDARS Data Services: 0=unconfigured, 1=Data Services, 2=no Data Services
04-10-2018, 05:10 PM
Senior Member
I wonder if it is an issue with the APIM not being compatible, it may accept the daughter board and work, but the travel link doesn't. Only an idea.
04-10-2018, 06:00 PM
I’m guessing you bought that daughter board from someone (I saw a for sale ad in the FS area). Have you contacted the person you bought it from for assistance? Guessing it’s sold as-is, but it may be good to at least make the seller aware of it in case it is an actual hardware/firmware incompatibilty that they are not aware of.
You have a a pretty specific case since you swapped a board in the APIM and not the whole assembly. Not many have done that yet to know if there’s any additional tweaking that needs to be done - it may not be something that changing as-built data can fix.
You have a a pretty specific case since you swapped a board in the APIM and not the whole assembly. Not many have done that yet to know if there’s any additional tweaking that needs to be done - it may not be something that changing as-built data can fix.
04-10-2018, 06:17 PM
Senior Member
Cargo Lights with Reverse Lights?
Is it possible to use ForScan to get the Cargo Lights to come on with the reverse lights or vice versa?
I put LEDs in so the Cargo Lights would help illuminate behind me in reverse.
Thanks-
I put LEDs in so the Cargo Lights would help illuminate behind me in reverse.
Thanks-
04-10-2018, 06:20 PM
The FORScan Guy
Thread Starter
ACM 727-01-01 1xxx xxxx xxxx
ACM 727-04-01 x0x1 x155 53xx
04-10-2018, 09:05 PM
The other idea was to find the AS-Built data from a lariat and upload and try that. Picture is of my ACM settings
04-10-2018, 09:12 PM
My wife had an old hp netbook running windows 7 starter that I wanted to use for forscan. I got forscan itself set up and purchased the usb obd2 connection recommended in the first post of the thread. I went to the website that was on the directions sheet for the connector and downloaded the driver, but the netbook is not accepting the driver. Is it the starter version of windows that is causing problems or am I doing something wrong?
04-10-2018, 11:41 PM
Junior Member
My wife had an old hp netbook running windows 7 starter that I wanted to use for forscan. I got forscan itself set up and purchased the usb obd2 connection recommended in the first post of the thread. I went to the website that was on the directions sheet for the connector and downloaded the driver, but the netbook is not accepting the driver. Is it the starter version of windows that is causing problems or am I doing something wrong?
04-10-2018, 11:51 PM
Senior Member