FORScan - software to enable/disable features in your truck
Senior Member
I don't know about those that have added the aftermarket system, but with the factory remote start FORScan changes aren't needed.
On the display go to Settings-> Advance Settings ->Vehicle -> Remote Start -> Climate Control -> then select Auto, when the truck's cabin temp is below a certain level the defrost, heated seats, & heated wheel (if you have it ) will come on
On the display go to Settings-> Advance Settings ->Vehicle -> Remote Start -> Climate Control -> then select Auto, when the truck's cabin temp is below a certain level the defrost, heated seats, & heated wheel (if you have it ) will come on
Senior Member
There is but only in the lariat and above I know on the XLT it doesn’t give you that option all you can do set it up for auto and it should turn the seats on two depending on the temperature In the cab. My seats did get warm with remote start but hot like on the hi setting.
FORScan Enthusiast
I can't imagine it is the IPC. Is there a "keep seats on" option on the 2018s in the IPC? What is the logic behind thinking it is the IPC?
If anything it's got to be in the SCME. I'll do a compare later, but as Livin said, probably it's the firmware in the SCME, not an option.
If anything it's got to be in the SCME. I'll do a compare later, but as Livin said, probably it's the firmware in the SCME, not an option.
Senior Member
Ok great I was comparing 776 -SCME data from a 2018 not the same at all. Firmware differences for sure. On the FCIM look some bits are noted different in the first four lines of codes. The rest of the lines are the vin.
FORScan Enthusiast
Do you think it’s the seat modules firmware or something else?
The FORScan Guy
Thread Starter
Senior Member
iTrader: (1)
I've checked on my 2015 F150 and there wasn't an update to the FCIM software. There might be a way to cross flash the software from a newer vehicle, I just don't have that ability.
FORScan Enthusiast
I’m really close with the service manager so I can try that out lol I just need to make sure what module it is before we start updating stuff.
The FORScan Guy
Thread Starter
I can tell you with almost absolute certainty that it's in the FCIM. My mom's 2016 Edge was having issues with the heated mirrors coming on when remote started. I used IDS and upgraded the software on the FCIM, and it started remembering the heated seats from previous run cycles. It never did it before the software update.
I've checked on my 2015 F150 and there wasn't an update to the FCIM software. There might be a way to cross flash the software from a newer vehicle, I just don't have that ability.
I've checked on my 2015 F150 and there wasn't an update to the FCIM software. There might be a way to cross flash the software from a newer vehicle, I just don't have that ability.
The following users liked this post:
swamplynx (12-07-2017)