FORScan - software to enable/disable features in your truck
11-15-2017, 02:17 PM
Your memory button on the door, seat, pedals, mirror all in that 1,2,3 settings.
11-15-2017, 02:19 PM
Senior Member
Thanks I was not sure
11-15-2017, 04:06 PM
Yup, same, so i'm guessing be enabling the bambi mode, it disabled that, even though bambi mode now works. Or the code is just different on a 2018.
Is there a way to just look at a certain line of the as-built i backed up? I'd prefer not restore it all if i can. AKA, i'd like to know what the stock value was for just those 2 lines, rather than restoring the whole module and redoing all the BCM configurations again.
Is there a way to just look at a certain line of the as-built i backed up? I'd prefer not restore it all if i can. AKA, i'd like to know what the stock value was for just those 2 lines, rather than restoring the whole module and redoing all the BCM configurations again.
11-15-2017, 04:32 PM
Yup, same, so i'm guessing be enabling the bambi mode, it disabled that, even though bambi mode now works. Or the code is just different on a 2018.
Is there a way to just look at a certain line of the as-built i backed up? I'd prefer not restore it all if i can. AKA, i'd like to know what the stock value was for just those 2 lines, rather than restoring the whole module and redoing all the BCM configurations again.
Is there a way to just look at a certain line of the as-built i backed up? I'd prefer not restore it all if i can. AKA, i'd like to know what the stock value was for just those 2 lines, rather than restoring the whole module and redoing all the BCM configurations again.
11-15-2017, 07:17 PM
Senior Member
I have a buddy with a new 2017 F-250 diesel complaining about the auto-off in his new truck. Any chance the location and values would be the same for or idea where I could find the information?
11-15-2017, 09:05 PM
Senior Member
https://docs.google.com/spreadsheets...#gid=882975515
11-15-2017, 10:12 PM
It's my first day
I'm going to take my fathers 2016 XLT 300a apart and install a backup camera to his OEM 4.2" screen in the dash. I"ll make a video of the entire process while I'm at it. It should be as simple as wring an RCA input to pins 6 and 12 and enabling in Forscan plus adding a power splice off the reverse lamp. That is a post Christmas project.
I also made myself an excel doc of the pin-out of MFT and Sync 3 54pin harnesses because I'm highly considering installing Sync 3 from a 2016 into my company's 2014 XL, that one I'm putting off until next spring at least.
My data is still a work in progress, but I uploaded a few of my files if anyone cares to point out any obvious flaws.
I'm not paying 4D Tech or OEM Radio $3000 CAD for a harness I can build myself.
I also made myself an excel doc of the pin-out of MFT and Sync 3 54pin harnesses because I'm highly considering installing Sync 3 from a 2016 into my company's 2014 XL, that one I'm putting off until next spring at least.
My data is still a work in progress, but I uploaded a few of my files if anyone cares to point out any obvious flaws.
I'm not paying 4D Tech or OEM Radio $3000 CAD for a harness I can build myself.
Last edited by Airborne_Ape; 11-15-2017 at 10:51 PM.
11-15-2017, 11:00 PM
It's my first day
Auto Engine Off is different than Auto Stop Start. It took me a year to figure out how to finally disable it on the F150. The Values should be the same in the BCM on the F250.
Show your friend this and ask him if it is his problem:
11-15-2017, 11:27 PM
The FORScan Guy
Thread Starter
And a FORScan thread for the 2017 Super Duties here: https://www.ford-trucks.com/forums/1...sheet-173.html