FORScan - software to enable/disable features in your truck
11-08-2017, 09:53 PM
11-08-2017, 10:45 PM
still struggling with xlt power fold mod
The first two pictures are my old door modules the forscan shot is my new modules.
2018 xlt. I can't seem to get this thing programed for power fold or puddle lights.
If you guys can help me figure this out I will be grateful. Forscan takes the new codes but nothing happens.
Last edited by flyingcarpenter; 11-08-2017 at 10:47 PM.
11-08-2017, 11:19 PM
Senior Member
The first two pictures are my old door modules the forscan shot is my new modules.
2018 xlt. I can't seem to get this thing programed for power fold or puddle lights.
If you guys can help me figure this out I will be grateful. Forscan takes the new codes but nothing happens.
Last edited by Coola1; 11-08-2017 at 11:23 PM.
11-08-2017, 11:51 PM
Senior Member
Anyone know what exactly this parameter is or have tested (played) with it?
726-32-01-xxxx-xxx*-xxxx
"Switch Type Cfg: 0=none, 1=1 button, 2=2 button, 3=3 button"
I'm already familiar with the "dark car" mode and have enjoyed it up to this point. But I'm starting to miss my interior courtesy/dome lights upon disarm/unlock. Upon disarm/unlock or door ajar, I'd like to reinstate just the interior courtesy lights without triggering the exterior "courtesy" lights to come on if possible. I do not miss the tailgate LED (tow hitch illumination) and upper cargo light coming on every time I disarm the truck or open a door. I just want those to come on manually as I need them.
726-32-01-xxxx-xxx*-xxxx
"Switch Type Cfg: 0=none, 1=1 button, 2=2 button, 3=3 button"
I'm already familiar with the "dark car" mode and have enjoyed it up to this point. But I'm starting to miss my interior courtesy/dome lights upon disarm/unlock. Upon disarm/unlock or door ajar, I'd like to reinstate just the interior courtesy lights without triggering the exterior "courtesy" lights to come on if possible. I do not miss the tailgate LED (tow hitch illumination) and upper cargo light coming on every time I disarm the truck or open a door. I just want those to come on manually as I need them.
11-08-2017, 11:51 PM
The FORScan Guy
Thread Starter
The first two pictures are my old door modules the forscan shot is my new modules.
2018 xlt. I can't seem to get this thing programed for power fold or puddle lights.
If you guys can help me figure this out I will be grateful. Forscan takes the new codes but nothing happens.
2018 xlt. I can't seem to get this thing programed for power fold or puddle lights.
If you guys can help me figure this out I will be grateful. Forscan takes the new codes but nothing happens.
11-09-2017, 12:15 AM
The FORScan Guy
Thread Starter
Anyone know what exactly this parameter is or have tested (played) with it?
726-32-01-xxxx-xxx*-xxxx
"Switch Type Cfg: 0=none, 1=1 button, 2=2 button, 3=3 button"
I'm already familiar with the "dark car" mode and have enjoyed it up to this point. But I'm starting to miss my interior courtesy/dome lights upon disarm/unlock. Upon disarm/unlock or door ajar, I'd like to reinstate just the interior courtesy lights without triggering the exterior "courtesy" lights to come on if possible. I do not miss the tailgate LED (tow hitch illumination) and upper cargo light coming on every time I disarm the truck or open a door. I just want those to come on manually as I need them.
726-32-01-xxxx-xxx*-xxxx
"Switch Type Cfg: 0=none, 1=1 button, 2=2 button, 3=3 button"
I'm already familiar with the "dark car" mode and have enjoyed it up to this point. But I'm starting to miss my interior courtesy/dome lights upon disarm/unlock. Upon disarm/unlock or door ajar, I'd like to reinstate just the interior courtesy lights without triggering the exterior "courtesy" lights to come on if possible. I do not miss the tailgate LED (tow hitch illumination) and upper cargo light coming on every time I disarm the truck or open a door. I just want those to come on manually as I need them.
The following users liked this post:
CeeDee (11-09-2017)
11-09-2017, 01:55 AM
Senior Member
Help! Just noticed that both my headlamp auto dim and the lane assist have both stopped working. I haven't done anything in forscan for several weeks but when I went into advanced settings on the IPC, the auto dim and Lane keeping settings are not shown. Any suggestions?
2016 lariat 502a with tech pack/acc/ park assist etc.
TIA!
2016 lariat 502a with tech pack/acc/ park assist etc.
TIA!
11-09-2017, 02:07 AM
I want to put the cree led HXPs in my truck. Do I need the anti flicker resistors or can I just use FORSCAN to fix it?
11-09-2017, 07:57 AM
Senior Member
Yes I have to my XLT but with the Sony amp which wires up totally different. The Sony sub only has four wires to it, one pair for left speaker and other set for the right. Now this sub alone does not have an amp to drive it so I don’t know how will it will sound.