Originally Posted by Livnitup

If you've restored your as-built values in APIM and you're still having the issue, try resetting APIM & FCIM modules in FORScan under the wrench icon.

Originally Posted by Anonymous1

Sorry if this has been asked before, but is there way to have low beams and fogs be DRL?

Originally Posted by DignifiedDevin

It looks like you can put your DRLs on W/low beams with this
726-26-02 x1xx xxxx xxxx
726-50-01 02xx

but adding Fogs requires you to change
726-45-01 xxxx 7Fxx xxxx
726-50-01 04xx

so the question is do you change

726-50-01 **xx to 02 or 04?

Originally Posted by Theocoog

What happens when Forscan resets the APIM? Does software get wiped out and require a reinstall/reload?

Originally Posted by carrierj

You can have low beams (02), OR fogs (04) at 726-50-01.
726-45-01 7F change is required to enable all the DRL choices.

726-26-02 x1xx xxxx xxxx includes your park lights with whatever option you choose at 50-01

Originally Posted by DignifiedDevin

Okay, so there is no value to put (02) and (04) together or has it never been tested?

Originally Posted by carrierj

Being that both of these values go in the same place, it doesn't seem possible. However, if you want to try 06 and check it! I don't know if it's been tested though.

Originally Posted by Livnitup

No, nothing gets wiped. It's as harmless as rebooting your computer.

Originally Posted by carrierj

Being that both of these values go in the same place, it doesn't seem possible. However, if you want to try 06 and check it! I don't know if it's been tested though.

Originally Posted by DignifiedDevin

I'm thinking I might! 06 isn't shown in the BCM tab so whats the worst that can happen!