FORScan - software to enable/disable features in your truck
08-28-2017, 05:57 PM
08-28-2017, 11:26 PM
IPC Module
First off, many kudos to all who make this forscan and thread successful. I've made a few changes, but am stumped on this one.
2016 xlt, 302a, 2.7 . Would like to see eng/trans temps above guages, but can't seem to get it to work.
As built---IPC 720-07-01 8401 80A0 6034
Spread sheet common tab 8/17/17 xxxx x65x xxxx (noTBC)
Spread sheet IPC tab 8409 8E50 60FA (will try in morning)
Guage needles hang DOWN from top of cluster; maybe no room left?
Possibility that I may have scrambled the as built coding during first foray into the truck's brains.
Done a lot of thread searching, my brain hurts. Time for bed.
Many Thanks, Tom
hollidayt@verizon.net
2016 xlt, 302a, 2.7 . Would like to see eng/trans temps above guages, but can't seem to get it to work.
As built---IPC 720-07-01 8401 80A0 6034
Spread sheet common tab 8/17/17 xxxx x65x xxxx (noTBC)
Spread sheet IPC tab 8409 8E50 60FA (will try in morning)
Guage needles hang DOWN from top of cluster; maybe no room left?
Possibility that I may have scrambled the as built coding during first foray into the truck's brains.
Done a lot of thread searching, my brain hurts. Time for bed.
Many Thanks, Tom
hollidayt@verizon.net
08-29-2017, 01:02 AM
The FORScan Guy
Thread Starter
720-04-01 xxCx xxxx xxxx
08-29-2017, 01:05 AM
The FORScan Guy
Thread Starter
First off, many kudos to all who make this forscan and thread successful. I've made a few changes, but am stumped on this one.
2016 xlt, 302a, 2.7 . Would like to see eng/trans temps above guages, but can't seem to get it to work.
As built---IPC 720-07-01 8401 80A0 6034
Spread sheet common tab 8/17/17 xxxx x65x xxxx (noTBC)
Spread sheet IPC tab 8409 8E50 60FA (will try in morning)
Guage needles hang DOWN from top of cluster; maybe no room left?
Possibility that I may have scrambled the as built coding during first foray into the truck's brains.
Done a lot of thread searching, my brain hurts. Time for bed.
Many Thanks, Tom
hollidayt@verizon.net
2016 xlt, 302a, 2.7 . Would like to see eng/trans temps above guages, but can't seem to get it to work.
As built---IPC 720-07-01 8401 80A0 6034
Spread sheet common tab 8/17/17 xxxx x65x xxxx (noTBC)
Spread sheet IPC tab 8409 8E50 60FA (will try in morning)
Guage needles hang DOWN from top of cluster; maybe no room left?
Possibility that I may have scrambled the as built coding during first foray into the truck's brains.
Done a lot of thread searching, my brain hurts. Time for bed.
Many Thanks, Tom
hollidayt@verizon.net
Edit: Wait, if you have an XLT you don't have the 8" cluster unless you added it after you bought the truck. If you don't have the 8" cluster display you can't do temps above gauges.
Last edited by Livnitup; 08-29-2017 at 01:09 AM.
08-29-2017, 08:57 AM
[QUOTE=Livnitup;5448765]If your as-built is IPC 720-07-01 8401 80A0 6034 then the following is what you should use for temps: 720-07-01 xxxx x250 xxxx
What OBDII scan tool should look buy.
What OBDII scan tool should look buy.
08-29-2017, 09:29 AM
Changed to C, came up on cluster and yes to +and- buttons below TBC. Thanks
08-29-2017, 09:46 AM
I and many others use the OBDLink MX, bluetooth. Works great and no external switch to flip to read the HS modules and MS modules. Amazon has them and they have cheaper ones as well.
08-29-2017, 10:18 AM
Senior Member
08-29-2017, 05:48 PM
It's my first day
The following users liked this post:
CeeDee (08-29-2017)
08-29-2017, 08:00 PM
The following users liked this post:
TexasFording (08-30-2017)