FORScan - software to enable/disable features in your truck
07-22-2017, 11:41 PM
#9901
It's my first day
Originally Posted by i8iridium
Man, I hope you find a way to get the outside temperature on the IPC.
07-22-2017, 11:45 PM
#9902
The FORScan Guy
Thread Starter
07-22-2017, 11:47 PM
#9903
It's my first day
I made a thing.
07-22-2017, 11:57 PM
#9906
The FORScan Guy
Thread Starter
I believe it's a separate connector at the bumper on the 2017 Super Duties for the trailer camera/tpms & a separate module for trailer tpms (see attached pdfs)
Last edited by Livnitup; 07-23-2017 at 12:00 AM.
The following users liked this post:
i8iridium (07-23-2017)
07-23-2017, 12:19 AM
#9907
It's my first day
Originally Posted by i8iridium
And to add to the confusion, not all 12 gens did that. My 2012 didn't. I think they changed the turn signal switch style 2013 or 2014. Same as my wife's 2014 explorer. That was a horrible implementation of that turn signal switch.
Last edited by Airborne_Ape; 07-23-2017 at 02:57 PM.
07-23-2017, 08:46 PM
#9908
The Source
(If it doesn't support it, it won't show anything obviously)
OAT=Outside Air Temperature
720-02-01: xxxx xxxX xYxx
X: Add/Enable Hex 8 bit at value - Tells IPC that OAT source is FCIM
Y: Add/Enable Hex 2 bit at value - Tells IPC to show OAT
Example:
720-02-01: 4DE0 3C31 1CE0
would change to: 720-02-01 4DE0 3C39 1E**
07-23-2017, 09:21 PM
#9909
The FORScan Guy
Thread Starter
If your instrument cluster firmware supports it... these changes would enable it:
(If it doesn't support it, it won't show anything obviously)
OAT=Outside Air Temperature
720-02-01: xxxx xxxX xYxx
X: Add/Enable Hex 8 bit at value - Tells IPC that OAT source is FCIM
Y: Add/Enable Hex 2 bit at value - Tells IPC to show OAT
Example:
720-02-01: 4DE0 3C31 1CE0
would change to: 720-02-01 4DE0 3C39 1E**
(If it doesn't support it, it won't show anything obviously)
OAT=Outside Air Temperature
720-02-01: xxxx xxxX xYxx
X: Add/Enable Hex 8 bit at value - Tells IPC that OAT source is FCIM
Y: Add/Enable Hex 2 bit at value - Tells IPC to show OAT
Example:
720-02-01: 4DE0 3C31 1CE0
would change to: 720-02-01 4DE0 3C39 1E**
Just tried and didn't work on my 8" IPC unfortunately
07-23-2017, 09:26 PM
#9910
If your instrument cluster firmware supports it... these changes would enable it:
(If it doesn't support it, it won't show anything obviously)
OAT=Outside Air Temperature
720-02-01: xxxx xxxX xYxx
X: Add/Enable Hex 8 bit at value - Tells IPC that OAT source is FCIM
Y: Add/Enable Hex 2 bit at value - Tells IPC to show OAT
Example:
720-02-01: 4DE0 3C31 1CE0
would change to: 720-02-01 4DE0 3C39 1E**
(If it doesn't support it, it won't show anything obviously)
OAT=Outside Air Temperature
720-02-01: xxxx xxxX xYxx
X: Add/Enable Hex 8 bit at value - Tells IPC that OAT source is FCIM
Y: Add/Enable Hex 2 bit at value - Tells IPC to show OAT
Example:
720-02-01: 4DE0 3C31 1CE0
would change to: 720-02-01 4DE0 3C39 1E**
