Airborne_Ape

To each his own I guess. That's why I like having it setup as one. I can precisely control how much it blinks by lightly holding on it and if I accidentally touch it I won't signal into the wrong lane 5 times. I'll call it 1990's mode and I'm a big fan so far.

Also, did you see my note in the video regarding 726-14-01?

Boomer8

Thanks for the tip on this!

Any tips or help on programming the mirror tilt would be great. Or is it simply that you have to press and depress the mirror select button, and that is life?

Thanks again!

digitaltrucker

Hope this works on my 13! Thanks!

flsdiver

iTrader: (1)

Not sync 3 at all. Nothing to do with GT Blue?
Still running Ancient, deprecated, not supported,old ... Sync 2.
I am trying to get the apim to show the proper color bubble choices on the ambient screen that are now in effect with this bcm change:
Lincoln Ambient Lighting Colors - Fixes Incorrect Color Choices When Using Lincoln Theme:
BdyCM - 726-31-02: xxxx 07xx xxxx
Which works, as i now have white and amber new colors.

Current APIM Ambient Bubble Colors:


So My Goal: (White Bubble top left, and color order is changed)


This is working on Sync 3 with some changes to Lincoln theme, just can't get it yet to work on Sync 2

i8iridium

iTrader: (1)

You might have to pull the as built from that Lincoln and compare values to yours. Might get you closer.

Edit: Didn't see your previous post about loading the asbuilt from a Lincoln.

i8iridium

iTrader: (1)

I did, very nice. I'm not messing with anything since I got mine fixed. But do you think once you enable that bit, you can go back to 726-22-02 and disable that bit? Also, when you say it has a DTC? What is it and does it get rid of the two permanent DTCs?

lucas8888

@flsdiver with the lincoln as built data, do any of the ***** change the lights to the lincoln colors even tho they show as your default ford colors? I'm just wondering if the actual file that generates this screen is different between Lincoln and ford.

flsdiver

iTrader: (1)

Yes,
if i select one of the blue bubbles the ambient turns white,
if i select the green the lights turn blue,
if i select the other blue, the lights turn green,
if i select the amber the lights turn the much nicer lincoln amber, not so red like standard ford color.
it's just a bubble color and order issue on the apim screen.
so, the bcm is sending the lincoln colors.

Update...
I wrote the whole apim asbuilt from a 2014 Sync2 MKC with Lincoln colors set in the BCM.
It did not adjust the bubble colors.
I did get an APIM DTC after this, that external card missing. Tried to pull in update? Temporary no communication with the NAV Card? Don't know.
Next step i guess i will dig through the sync2 update package and see if i can find the art work.
Perhaps
EA5T-14F496-BE - 8" Lincoln Graphics Pack (ONLY SELECT FOR A LINCOLN VEHICLE)
EA5T-14F496-VE - Lincoln MKC Graphics Pack Patch.

Livnitup

I've just verified that the truck will add 2 additional flashes when a trailer is hooked up to any of the values below. Thanks Airborne_Ape!

Electronic Turn Signal Cancel Cfg:
SCCM 724-01-01 xxxx x*xx xx
0,1,2,3=1 flash
4,5= 2 flashes
6,7= 3 flashes
8,9= 4 flashes
A,B= 5 flashes
C,D = 6 flashes
E,F= 7 flashes

carrierj

Yeah, I was just looking at the spreadsheet (SCCM tab) online when it started moving on it's own. I realized you were adding this to it. I was able to watch you edit it in real time. Pretty cool. I always thought it was edited locally then the new file was updated to replace the old one.

Edit: Any idea what the line above is used for? Cluster Crossover Cfg