FORScan - software to enable/disable features in your truck
#9481
The FORScan Guy
Thread Starter
#9482
Gone Golfin
iTrader: (3)
Seems like it changed the position of the display icon on the screen.
#9483
The Source
#9484
It's my first day
I found something tonight that should make some of you smile (bunny):
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
The following 42 users liked this post by Airborne_Ape:
1911Bandit (07-12-2017),
1st-F-150 (07-17-2017),
330smg (07-12-2017),
arcticcatmatt (09-26-2018),
B-ManFX4 (07-13-2017),
and 37 others liked this post.
#9485
Member
I found something tonight that should make some of you smile (bunny):
Turn Signal Blink Rate
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
Turn Signal Blink Rate
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
The following users liked this post:
Bandera (07-12-2017)
#9486
It's my first day
That's what the thanks button is for lol. I know guys have been asking about it on here for a while, I found it by accident, but that's really what ForScan is a ll about. Play around; I mean, these things don't uncover themselves.
The following 4 users liked this post by Airborne_Ape:
1st-F-150 (07-17-2017),
digitaltrucker (07-12-2017),
Gator9329 (07-16-2017),
Static2606 (07-13-2017)
#9487
Member
#9488
Senior Member
iTrader: (1)
I found something tonight that should make some of you smile (bunny):
Turn Signal Blink Rate
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
Turn Signal Blink Rate
SCCM
724-01-01 xxxx xYxx xx:
0 = Triple flash disabled
4 = Two flashes
6 = Default Triple flash operation
7 = Turn signal stays on until canceled
8 = Four flashes
A = Five flashes
C = Six flashes
E = Seven flashes
The following 3 users liked this post by i8iridium:
#9489
i'm going to flash a whole 2015 lincoln mkc apim asbuilt to mine today...only about 10 hex differences, only a few we don't have mapped. See what happens.
Last edited by flsdiver; 07-12-2017 at 07:46 AM.
#9490
It's my first day
Originally Posted by flsdiver
Yes...I did that, animation splash on apim start/shut for lincoln was the result. Same as mitcdenn reported above.
i'm going to flash a whole 2015 lincoln mkc apim asbuilt to mine today...only about 10 hex differences, only a few we don't have mapped. See what happens.
i'm going to flash a whole 2015 lincoln mkc apim asbuilt to mine today...only about 10 hex differences, only a few we don't have mapped. See what happens.