Livnitup

37psi = 2525
38psi = 2626

gwpfan

I did a search but does anyone know if one can adjust engine idle settings?

Idle RPM while in Park/Neutral?

Idle RPM with in Drive?

Just want to bump the idle up a touch while in drive for a smoother run.

Livnitup

FORScan can't program PCM which is where something like this would be.

gwpfan

Bummer, thanks

DanMc85

Most engine tuners for enhanced performance also have engine idle control ability. Not sure if you ever considered looking into something like that.

carrierj

Where did you get the maps SD card? Some have reported getting bad cards from Ebay. If you know of someone that also has the same A7 card, try theirs and see if it works. Or, if you have a laptop with a SD slot, see if you can read the contents on the card there.

JAK167

I have a 2016 Lariat with the Tech package, has all the options except ACC and park assist. Truck has dual zone climate control. Been trying different settings found by the members to tweak the truck (ie: double-honk, lincoln mirrors, etc.) I have not tried to experiment with changes but have only followed ones the members have confirmed. I made sure to back up all of my modules prior to my mods, so I have a clean as built.

BTW great job everyone, you guys rock!

I noticed the other day the dual zone climate control button now acts in reverse. When I have the button not pushed with the yellow light off, the zones run on separate temperatures. When I have the button pushed with the yellow light on, the zones run on the same temps. I figured something might have gotten messed up with the various programmings, turning truck on and off etc. I reverted to my clean, stock as built save, but the button is still reversed. I also tried uninstalling, reinstalling all of the mods one at a time to see if I could find a mod which triggered the change, but nothing showed.

Any suggestions? Or has anyone found the location of the dual zone button in FORScan?

Livoniabob

I have a 2015 so might be different.. But on mine the drivers side **** turns on the auto temp, when pushed and lights up,,, the passenger side one when pushed turns on the dual zone and lights up when dual zone is active..

There might also be a button on the screen,, if needed I will check for you..

JAK167

Yes. It's supposed to work the way you describe. When the passenger button labeled dual active (ie: light on) then the passenger can set a temp different than the driver. It worked that way when I got the truck (I've only had it a couple of weeks). But now, when the light on, the temps can only be adjusted together. When the light off, then the temps can be adjusted separately. It's reversed. I just can't figure out how it got that way.

Livoniabob

Ok now I'm confused,,,, to me it sounds like you are pulling a "Donald" and changing the story..


Did you do any changes to the climate screen,, seats, wheel?