FORScan - software to enable/disable features in your truck
11-29-2016, 01:47 PM
#3541
If you run into issues I can help you here via pm, I don't do facetime or phone lol. I've helped a lot of people this way and I'm confident I can get you through any issues.
If your laptop doesn't have built-in bluetooth, I'd recommend buying this usb bluetooth adapter (I've used it and know it works with the MX BT): https://www.amazon.com/gp/product/B009ZIILLI/
If your laptop doesn't have built-in bluetooth, I'd recommend buying this usb bluetooth adapter (I've used it and know it works with the MX BT): https://www.amazon.com/gp/product/B009ZIILLI/
11-29-2016, 02:16 PM
#3542
It's my first day
Well, I finally got drivers side to work programmed to another # then programmed the mirror to the tip but not in reverse then put in reverse and set that to tip and went back to normal memory and readjusted so I could see and thought that is what did it but went to the passenger side and it didn't work so kept trying then my 6 year old came down to help and got in the truck to see what I was doing. So I showed him what it was doing and was ready to give up for the night and boom it worked. So I don't know what the fix really is,maybe adjusting in reverse and waiting longer to goto park to save? IDK
I did leave the C out, so 740-12-01 F0xx seems to do it all.
I did leave the C out, so 740-12-01 F0xx seems to do it all.
I've run into APIM issues like that before.
11-29-2016, 02:20 PM
#3543
Senior Member
11-29-2016, 02:48 PM
#3544
It's my first day
delete post
11-29-2016, 02:59 PM
#3545
It's my first day
"BCM:
726-27-01 x0xx xxxx xxxx Front Lamp Outage Detection Off
726-27-01 0001 0000 01xx fogs and high beam remembered after off/on (** Use this if your truck has stock LEDs **)"
I'm also 95% certain 726-50-01 needs to be changed to 108E as well.
11-29-2016, 03:04 PM
#3546
Senior Member
The following users liked this post:
TexasFording (11-30-2016)
11-29-2016, 03:09 PM
#3547
Finally read every page. Got my OHP wired reader and my WPT1212 harness. Haven't had a chance to sit down and wire things up yet.
Copied all my defults and changed a value or two. Have Bambi mode
Canadian disabled DRL.
Did the double honk but didn't work so gotta revisit that.
Heated seat controls (like others always defaults home now)
Copied all my defults and changed a value or two. Have Bambi mode
Canadian disabled DRL.
Did the double honk but didn't work so gotta revisit that.
Heated seat controls (like others always defaults home now)
11-29-2016, 03:20 PM
#3548
Senior Member
I've already asked on the other FORScan forum thread and nobody seems to know for sure. My son has a 2014 F-150 and wants to replace his traction control button with the Traction Control/ Hill Descent Control switch on his XLT and enable it through FORScan. Does anyone have an idea if using the same values for the 2015+ address will work on the 2014?
Thanks in advance.
Thanks in advance.
