I've got an 18 XLT that I added power fold mirrors,I upgraded the door harnesses an modules but when I enabled the puddle lights with forscan they came on but were very dim.I tried the code for led and regular bulb but it didn't matter they are always dim.Has anyone else ran into this issue before?I did get the Lincoln auto fold option to work but ran into troubles with the puddle lights.I haven't tried to enable the spot lamps yet.Any help is appreciated

 

Do you have the information to enable it in forscan i cant find it

 

BCM
726-47-02 x*xx xxxx xxxx Puddle Lamp Circuit Cfg: 0=not used, 1=used
726-57-01 x*xx xxxx xxxx Dome Puddle Selection Cfg: 0=disable both, 1=enable both, 2=enable dome, 3=enable puddle
Also, other puddle lamp settings at 726-62-01, and 726-62-02

 

Thank you. do you have the spreadsheet for this I'm also doing spot lights harness is coming in. Im confused on enable dome part

 

go to the first post on this thread, there is a link to the latest spread sheet

 

 

Should i reprogram my modules or can i use the modules i picked up from someone on this forum that has a 2019 that had spots and puddle lights dg9t 14b531 fc and dg9t 14b533 fc for my 2016 built on 8/28/16

 

Plug them in and see if they work if not then reprogram

 

I just got the mirror surround an flood light buttons and swapped them into the truck onto the existing wire harness. I will be working to enable the flood lights next via ForScan.

Anyone done this successfully yet?

Pics of mirrors and vent/button set up attached.

 

Did you also pick up the required Spotlight Control module (installs under the dash)? Didn’t see it in your pics.