Ford f150 2015 xlt add factory 360 camera system
#91
Senior Member
Man among men. I need to get up your way and buy you dinner.
Thanks for mapping this out for us.
Thanks for mapping this out for us.
The following users liked this post:
lucas8888 (05-14-2017)
#93
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
The higher end trucks with 2.7 & 360 have a bezel with three buttons at top - I don't know a part # though....I'm in the same boat as you (only in a XLT)
#94
Senior Member
Yeah I put that in the write up that I think that's why they didn't offer the 2.7 with the 360 camera as they use the same pin (2) on the switch. they are just different colors depending if it's start stop or 360. I picked up a 3 button bezel from a super duty and was going to play around with it.
#95
Senior Member
Also if you didn't want to swap bezels you could pick what switch you want there and then hook up a momentary switch to ground to make the other one work. So if you have start stop and want 360. Pull the pin out and wire it to a switch then add a new pin to go to the IPMB
#96
Senior Member
#97
Senior Member
The following 7 users liked this post by lucas8888:
2016BoostedGreyGoose (05-16-2017),
Airborne_Ape (05-02-2018),
Firerunner (05-20-2017),
ilkhan (07-23-2017),
manwithtruck (05-15-2017),
and 2 others liked this post.
#98
Curious off hand how much you spent on all the parts for the whole install? I'm going to go back and reread everything to decipher what I need for my 2016 lariat to make this happen seeing how u did yours on the xlt. Not sure if I want to do the oem or aftermarket way.
#99
Senior Member
About $1100
The following users liked this post:
2016BoostedGreyGoose (05-16-2017)
#100