Fog Lights on XL, please help
#13
Senior Member
The OP said his did not, but he had purchased a HL switch that included the fog light switch. If his harness has the wires, then the job will be a little easier.
#15
I just completed this upgrade. There was a plug under the passengers headlight that had a blank cap on it. I removed this and bought a foglight harness from tasca that plugged right into it. Bought a used bumper from Craigslist that had the fog lights. I then got a factory switch with the foglight option off of eBay. Plugged it all in today and it works!!!! No need to program anything
The following users liked this post:
_FL_FX4 (03-26-2018)
#16
Senior Member
XL with the STX or SPORT package will have fog lights.... This is 2017. the "XL" package has a bit more options than earlier years.
Just a plain ole XL probably wont.
Just a plain ole XL probably wont.
#18
Senior Member
#20
Junior Member
If your switch connector has the wire, then you can check to see if the wires for the fog lights are pinned at the BCM, connector 2280G. Brown on #12, yel/org on #5. If these are there, then look for the connectors from the harness in the fog light area.
If you are lucky and have all of this, then you will need FORScan to enable them in the BCM.
If you are lucky and have all of this, then you will need FORScan to enable them in the BCM.
can I ask you what everything with FORScan need to be enabled?
I have new switch and all wires but no succes.
I did this change:
726-45-02 xxxx x1xx xxxx Fog Lamp Circuit Cfg: 0=unused, 1=used
Thanks for your help.