rumor says carrying a heavy load and swerved to mis a dog.
btw not my post got it from another forum.
tanked_darren
06-22-2017 11:27 PM
I heard if you strap a load down it doesn't move.
jstrain14
06-22-2017 11:30 PM
Originally Posted by tanked_darren
I heard if you strap a load down it doesn't move.
I like this idea. Problem solved. :thumbup1:
BertaPower
06-22-2017 11:32 PM
I saw a ram 1500 on the shoulder of the highway the other day. His trailer popped off his hitch and crushed his entire box.
What a weak truck bed.
Big Six
06-22-2017 11:36 PM
Carrying a "heavy square object" loose in the bed of a pickup truck is never a good idea. But, at least the "heavy square object" did not get out and terrorize the neighboring community. Two new concepts learned from this thread: Ratchet straps and Tie downs.... sheesh!
motsco
06-22-2017 11:38 PM
i'm not trying to make a negative but i would haul big block junk yard engines in my 87 ranger and without straps every turn you could feel the engine roll and hit the bed. the worst that happened was the tailgat was hard to open due to the stretched out bed panels.
Big Six
06-22-2017 11:39 PM
Originally Posted by BertaPower
(Post 5364682)
I saw a ram 1500 on the shoulder of the highway the other day. His trailer popped off his hitch and crushed his entire box.
What a weak truck bed.
Or, maybe just a really strong trailer? Just playin' devil's advocate. :devil:
Big Six
06-22-2017 11:49 PM
Originally Posted by motsco
(Post 5364693)
i'm not trying to make a negative but i would haul big block junk yard engines in my 87 ranger and without straps every turn you could feel the engine roll and hit the bed. the worst that happened was the tailgat was hard to open due to the stretched out bed panels.
I guess it would be important to know exactly what the "heavy square object" was. I mean, if it was something like a Liberty safe, we're talking 800+ lbs in many cases. "Heavy" is somewhat subjective, but when we're talking about a load in the back of a pick up, I expect "heavy" to be at least in the Liberty safe range. Also, in this case anyway, size matters. If the "heavy" object is close to the same size as the width of the bed, it will not do as much damage when swerving as an object that is just as "heavy," but is smaller and has some room to pick up some speed before it slams into the side of the bed. Finally, we don't know how fast the truck was moving when it swerved. That would also factor into the amount of damage that would be expected. Many variables to consider that are unknown in this case. At any rate, that sure is an ugly picture. I'd be sick if that were my truck.
77Ranger460
06-22-2017 11:53 PM
A front end collision would have been interesting.
Fosters
06-22-2017 11:56 PM
Heavy square object in the bed? Teach him from hauling a chevy truck around like that...
