Factory sub
#971
Originally Posted by F175
Any pics, or does it look identical? Quick install?
Looking at this, it sort of implies that other speakers are upgraded also? https://www.tascaparts.com/oem-parts...AaAoZAEALw_wcB
Looking at this, it sort of implies that other speakers are upgraded also? https://www.tascaparts.com/oem-parts...AaAoZAEALw_wcB
#972
Senior Member
Any pics, or does it look identical? Quick install?
Looking at this, it sort of implies that other speakers are upgraded also? https://www.tascaparts.com/oem-parts...AaAoZAEALw_wcB
Looking at this, it sort of implies that other speakers are upgraded also? https://www.tascaparts.com/oem-parts...AaAoZAEALw_wcB
#973
#974
Can anyone confirm if this will work with an 2018 stx without SiriusXM? Wanting to add this but after reading looks like you need the SiriusXM option with the radio to have power to the rear plug. Is this true, if so why? What’s the difference between SiriusXM vs non SiriusXM radios with sync3
thanks
#975
Senior Member
Can anyone confirm if this will work with an 2018 stx without SiriusXM? Wanting to add this but after reading looks like you need the SiriusXM option with the radio to have power to the rear plug. Is this true, if so why? What’s the difference between SiriusXM vs non SiriusXM radios with sync3 thanks
If you have the rear plug did you check to see if there is 12v power to it. Mine is hot all the time. The 6vdc turn on power is switched by the APIM. I don't know where you get the Sirius XM option from.
#977
Senior Member
A voltmeter will tell you what you are looking for. You need to read this: https://www.f150forum.com/f118/how-i...g-play-424185/
Then read it again.
Then read it again.
#978
Senior Member
without sirius it's very very very unlikely you have a signal, at best you'll have power. Being an 18 makes it even less likely that you'll be able to just use the plug and forscan changes to make it work.
#979
Senior Member
Hope this helps someone.
For those wanting to install the Kicker VGL3Z-18808-A and don't have the inlline OEM connector for the Sub/amp.
Below are the part numbers for the Motorcraft Pigtail ($50 - $100)
or
the vehicles you could pull it from at a Self-Serve Junyard. The one near me charges $6 for a pigtail.
Of course, You'll probably have to move some wires around.
First & Third pics are the lock on the liftgate,
The middle pic is in the trunk behind the access door trim panel
For those wanting to install the Kicker VGL3Z-18808-A and don't have the inlline OEM connector for the Sub/amp.
Below are the part numbers for the Motorcraft Pigtail ($50 - $100)
or
the vehicles you could pull it from at a Self-Serve Junyard. The one near me charges $6 for a pigtail.
Of course, You'll probably have to move some wires around.
First & Third pics are the lock on the liftgate,
The middle pic is in the trunk behind the access door trim panel
#980
Stimpy you Idiot!
I wish I would have seen this thread a few days ago.
I ordered the factory Kicker sub, part number VKL3Z-18808-A the other day for my 2019 XLT scab. I was looking for install instructions and found this thread with pics of the plug. I just looked to see if I had the plug for the sub and it is not there.
Freaking Ford.
What are my options to use this sub if any?
I ordered the factory Kicker sub, part number VKL3Z-18808-A the other day for my 2019 XLT scab. I was looking for install instructions and found this thread with pics of the plug. I just looked to see if I had the plug for the sub and it is not there.
Freaking Ford.
What are my options to use this sub if any?