Quick question, does anyone know what part #(s) are the factory screws to hold the sub in? Or if I can just get them at a hardware store? I would assume they have to be a certain metal in order to not have a bad reaction to the aluminum?

 

-W717038-S439 STUD
-W710869-S442 NUT AND WASHER ASY - HEX.

They are coated in a gray color

Edit this was for the Sony factory sub.

 

I'm mounting the kicker, I would assume it is the same. Do you know how many I need of each?

 

I got my Hideaway up and going . I like it . I had a switch on the sub enclosure in the wrong position.

 

Enabled Aux Sub and 7 Speaker Kicker Audio in Forscan but still not getting a signal on the green and purple using the harness in the rear passenger driver-side pillar in the back corner of the cab. Is there something else that may be missing?

 

Make sure that you clicked the "write" button after making the change. I made the same mistake initially. Also, backup your current configuration before changing anything so you can easily revert if you screw something up.

 

Looking at ford parts website the kicker has 3 bolts to hold it down. They are cheaper then what is used for the Sony one.

 

Just noticed something odd, when vehicle is not running the hideaway turns on but when truck is started it turns off. I had dealer enable aux subwoofer in forscan . I know others have had good luck with hideaway I did use factory plug with 1212 pigtail. Should I have ran power to battery? Any help would be appreciated. Clark

 

Set the hideaway to use the remote turn on and make sure you have the remote turn on wire connected. Signal sensing does not work right for some reason. It does exactly what you describe.

 

Awesome, So I connect remote turn on from hideaway to what?? Power from 1212 ?