Nice, glad to hear. After spending some more time with mine, I can report that I'm still happy with the performance. I think it offers a solid option for those that want pure plug and play, oem fit and a noticeable improvement in sound.

 

Works with any radio.

 

Yep a 10 is way better than an 8. Be sure to post pics when you're assembling it.

 

Can someone please post a picture where the factory sub connector can be located. from a previous picture in thread, it is not very clear

 

C pillar, behind the drivers side rear door, pull the trim up from the floor between the b and c pillar trims. At that point you can pull the c pillar trim away from the pillar and the connector will be down in there.

 

Thanks, anyone know if an XLT supercab trim 301A equipment group has the subwoofer harness behind the seat?

 

I see the connector. Ordered the FORSCAN hardware OBD etc and 1212 wiring. Waiting begins. Will be installing on Rockford Fosgate PS8. A couple of questions, Is it ok to feed the signal to both left and right RCA input on the amp (Factory wiring has single output ) ? I am assuming that enabling SCrew with 7 speaker option in FORSCAN provides LOW signals and not high ? People with "thud" due to instant amp kick on, have they found any solution ?

 

They all have it yes

 

I looked at the PS8 as well. The factory harness is rated for 20 amps according to lucas in the first couple of pages of this thread. The PS8 is rated for 30 amps, so you may run into issues if you try to use the stock wiring.

 

Thanks for reply bobby1409