Easy OEM upgrades?
#11
Senior Member
The parts you need for the plug/and 12V combo are:
WPT 962 for wiring
and
FL3Z-19A487-B for plug
It's a big project, and i thought about doing it but gave up. I don't know the part of the stock inverter. I just went aftermarket on the inverter, got a 1000Watt pure sine inverter and installing under middle back seat. The factory inverter is usually installed under rear passenger side seat. I don't think most trim levels are prewired to just install the stock inverter, add the plug and have it work. That's why i just went aftermarket and gave up on adding the OEM plugs. Had to return those two parts i listed above. maybe down the road i can figure out how to wire the plug in the front to my inverter...there are 2 wire harnesses behind my current config, which is just a 12V dc source. So theres hope that there is some stuff prewired. Let me know if you end up doing the project.
WPT 962 for wiring
and
FL3Z-19A487-B for plug
It's a big project, and i thought about doing it but gave up. I don't know the part of the stock inverter. I just went aftermarket on the inverter, got a 1000Watt pure sine inverter and installing under middle back seat. The factory inverter is usually installed under rear passenger side seat. I don't think most trim levels are prewired to just install the stock inverter, add the plug and have it work. That's why i just went aftermarket and gave up on adding the OEM plugs. Had to return those two parts i listed above. maybe down the road i can figure out how to wire the plug in the front to my inverter...there are 2 wire harnesses behind my current config, which is just a 12V dc source. So theres hope that there is some stuff prewired. Let me know if you end up doing the project.
The dash plug is the main thing i'm looking for. I'll check it out and see if there is a way to make it and like you want, an after market inverter work together.
The following users liked this post:
rjones02 (02-10-2018)
#12
Bobby J
OEM remote start. It's plug and play and this part number JS7Z-19A361-A works on 2015+ F-150's. It uses your factory key fob. All you have to do is plug it in and then you use
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)
https://www.12volt.solutions/product..._ford~md_f-150
https://www.12volt.solutions/product...nt=33482825924
Works like a charm.
#13
Bobby J
#19
Senior Member
Thread Starter
OEM remote start. It's plug and play and this part number JS7Z-19A361-A works on 2015+ F-150's. It uses your factory key fob. All you have to do is plug it in and then you use
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)
Also, I assume you have to buy the FT module instead of the JS module to plug in the remote access module? Which one did you use? And the JS module is for sure for the 2015-2018s instead of 2018s like some websites say?
I got the JS module because I want remote start with my flip key fob without additional remote start fobs. Unless the FT module will do that too? Then I might swap them out.
#20
Senior Member
OEM remote start. It's plug and play and this part number JS7Z-19A361-A works on 2015+ F-150's. It uses your factory key fob. All you have to do is plug it in and then you use
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)
Lock unlock lock on factory remote to start he truck. Easiest and best mod ever for this cold winter. Honestly 30 seconds to install. The hardest part is zip tying the unit up above the drivers foot well.
You could also go this route which is what I did after installing the above part. I want able to stay my truck from my desk at work since the parking garage is further than factory key fob remote will reach. So I went with the remote access remote start. Now I can use my cell phone to start my truck as long as truck and cell phone have cell service
This one requires two Ford parts
FT4Z-19A361-A (vss module)
DL3Z-19A390-B (remote access)