Decision time: Narrowed down to Nitto Ridge Grapplers or BFG KO2
#22
2016 XLT FX4/SE
Thread Starter
Here are the RGs
Extremely quiet. Far exceeding expectations thus far. My two inch ProComp level kit leaves me about 3/8" nose high. And I haven't loaded about 150 pounds of routine cargo in the back. Maybe add a block?
The following users liked this post:
jasonthompson276 (01-03-2020)
#23
Originally Posted by tigerfan_9
Ridge Grapplers any day.......if you go with the KO2 the really look at sizes in person, they are much more narrow then they claim and often look too skinny.
#24
Looks killer! Do you have a level? If so what size? What is your tire size? Your rims are 20x10 correct? Mpg hurt at all?
The following users liked this post:
jasonthompson276 (01-03-2020)
#26
I was slightly nose high after adding my Fox Coilovers. I swapped the rear blocks with 2" AutoSpring blocks. I have about .5" of rake now and I'm really happy with it.
The following users liked this post:
jpmcintosh (02-14-2017)
#27
Senior Member
iTrader: (2)
Looks great! Definitely will add these to my list for next time. I went with the KO2s in 285/65-20. Definitely a harder ride which I expected. They are inflated to 50-52psi which was the recommendation from BFG but I know a lot of guys here run them 42-48 psi? Wonder if the treadwear would be worse because of that?
As for block, I also added a rear block to take the nose high look out of mine after the level. Helped a bit.
Oh, as for fitment, I had to trim the inner part of my front mud flaps cause they were rubbing in reverse. Have a intermittent rub now, I think on the driver's side crash bar. Barley notice it. So not overly concerned.
Enjoy the tires!
As for block, I also added a rear block to take the nose high look out of mine after the level. Helped a bit.
Oh, as for fitment, I had to trim the inner part of my front mud flaps cause they were rubbing in reverse. Have a intermittent rub now, I think on the driver's side crash bar. Barley notice it. So not overly concerned.
Enjoy the tires!
#30
Sorry about all the questions, just a killer truck and want to make mine look similar