Originally Posted by Mikeincalgary

Question on the Carplay map on non-nav radios. When I press the map button on the Sync screen a lovely map of North America shows up and a blue dot showing where I am. However I need to click zoom a number of times to get to the street level. Is this correct or am I missing a setting?

Originally Posted by rhopkins

reformat the second thumb drive and make sure it is formatting in fat32 and 4096 sectors. I ran into this problem and that was the culprit. I reinserted the second thumb drive and it went ahead and finished the loading. When you buy thumb drives new they are formatted to 64bit per sector, and that will not work. Richard

Originally Posted by rhopkins

reformat the second thumb drive and make sure it is formatting in fat32 and 4096 sectors. I ran into this problem and that was the culprit. I reinserted the second thumb drive and it went ahead and finished the loading. When you buy thumb drives new they are formatted to 64bit per sector, and that will not work. Richard

Originally Posted by mysilverbullet

thank you so much!, the reformat worked, im updated now, part of the new team

Originally Posted by vmmvmmm

This happens in my truck with Nav as well.

Originally Posted by rhopkins

If you enter a destination then hit go it will immediately go to street view zoomed in...

Originally Posted by vmmvmmm

I much prefer the Sync nav version, as I find I frequently glance down to check cross streets, but rarely ever enter destinations. I wish CarPlay functioned in the same manner.

Originally Posted by bmanTTU

Can someone link the instructions again? I read through 10+ pages and unable to locate the files. Most of the links were dead. The only one I found that worked took me to the Focus site and there was only 1 file. I tried it and it didn't work.