View Poll Results: Cooling Seats - Are Your Seat Backs Working Properly?
Voters: 1637. You may not vote on this poll
Cooling Seats issue and TSB feedback
#831
Senior Member
Geeze I didn't even think of the beans. And now that you mention that the leftover potatoes we always have are easier to re-heat.
Im inclined to just take the seat apart and just make a permanent cooker. Hell it could work as a incubator for eggs if managed properly.
Im inclined to just take the seat apart and just make a permanent cooker. Hell it could work as a incubator for eggs if managed properly.
#832
That brings up another bitch I have. You can't power anything for a few hours if plugged into the back seat 12V outlet, like my TED Coleman cooler. Which I use when hauling cold food either from the store or to the cottage. It keeps turning off after a few minutes if I stop the engine. Be nice to have it being a 24/7 outlet and let me worry about not draining the battery to low to restart.
#833
Senior Member
That brings up another bitch I have. You can't power anything for a few hours if plugged into the back seat 12V outlet, like my TED Coleman cooler. Which I use when hauling cold food either from the store or to the cottage. It keeps turning off after a few minutes if I stop the engine. Be nice to have it being a 24/7 outlet and let me worry about not draining the battery to low to restart.
#834
Senior Member
Do you think Ford figures anyone dumb enough to pay this much money for these trucks is to dumb to be trusted with handling the situation? Or to notice their back is sweating when the seat cooler is on!
Last edited by Livoniabob; 07-24-2015 at 01:36 PM.
The following users liked this post:
kendive (07-24-2015)
#835
Would nice to see a comparison of these votes saying they have a properly working system. Full part number break down pictures etc.
#836
Senior Member
Pretty frustrating to be of the tech generation and have warnings all the **** over and barely usable gear. They have 20 year olds or something thinking we're ****ing 80 years old. This crap is so proprietary you can't modify it without ripping it out and starting over. Very frustrating the way the tech is being integrated.
#837
These vehicles are so distracting and full of non-sense tech (That is supposed to work well) that's ya wonder who is directing the programming.
#838
Senior Member
Ford be like
#839
Senior Member
i went out and unzipped my seat backs...my cooling unit exhaust vent goes DOWN and vents out of the bottom of the seat,
my intake filter was dirty to
so i guess the new seats just dont have enough spare room to run a vent out the bottom
my intake filter was dirty to
so i guess the new seats just dont have enough spare room to run a vent out the bottom
#840
Senior Member
RCSM airball.....
Well, I was hopeful until the Regional Customer Service Manager called as promised
After talking about the seat back cooling issue (I do not have ACC), it was as if it was the first time he had ever heard about it.....NO credibility as to others having the issue. I pointed him to this thread and the Ford SM page to get some background but all he wanted me to do was take the car to the dealership, have them look at it and have THEM contact the Ford Technical Support team...
I explained how many already had done just that with no results, but it was a broken record...take it to the dealer. I did send him an email with links to this and other Forums that are all on fire about this, but the RCSM was teflon as to admitting this was a Ford issue, what they are doing (if anything) to look into and when/how they will remedy the problem......almost a waste of my time!!
Sooooo....how DO we get Ford to sit up and address this problem.....Forums, SM and hotlines do not seem to do the trick.....Is Ford HQ in Michigan or WASHINGTON DC.....!!!!
Frustrating!!!....PS....otherwise I LOVE my new Platinum!
After talking about the seat back cooling issue (I do not have ACC), it was as if it was the first time he had ever heard about it.....NO credibility as to others having the issue. I pointed him to this thread and the Ford SM page to get some background but all he wanted me to do was take the car to the dealership, have them look at it and have THEM contact the Ford Technical Support team...
I explained how many already had done just that with no results, but it was a broken record...take it to the dealer. I did send him an email with links to this and other Forums that are all on fire about this, but the RCSM was teflon as to admitting this was a Ford issue, what they are doing (if anything) to look into and when/how they will remedy the problem......almost a waste of my time!!
Sooooo....how DO we get Ford to sit up and address this problem.....Forums, SM and hotlines do not seem to do the trick.....Is Ford HQ in Michigan or WASHINGTON DC.....!!!!
Frustrating!!!....PS....otherwise I LOVE my new Platinum!