toro1966

Messed up this clip while removing the front driver's kick panel (the one with the hood release cut out).

I am family certain it was jacked to begin with and stuck inside the slot. I know I can do without it, but I would rather replace it than the entire panel .

Does anyone have a link to this one or a part number so I can buy another (or 10)

Just on case, does anyone also have the number or link to that kick panel?

Thanks again!

johnday in BFE

iTrader: (1)

http://www.clipsandfasteners.com/ , you can try there for the clip. The kick panel, go to Tasca Ford parts, and look thru the body, interior section. Might even come with the clips.
This is what you want, https://www.clipsandfasteners.com/Fo...r-p/a19421.htm

Narly1

What he said.

If you know where the clip came from/what part it was on & it's location that is 90% of the battle. From there you can get a part number and go search the entire web for it.

smjx

iTrader: (1)

i'm 99% positive those clips are the exact same ones for like the sill plate area when you push down and lock them into the channel clips. They're supposed to dig into the plastic and not come off, but when you pull hard enough on the sill plates they pop off.

toro1966

Tried that. Couldn't find it on Tasca .That was actually the first place I looked. Just couldn't find the right diagram.

smjx

iTrader: (1)

https://www.tascaparts.com/auto-part...-trim-cab-scat


Should be #28 in this link.

smjx

iTrader: (1)

Here's the actual link - https://www.tascaparts.com/oem-parts...ItN2wtdjYtZ2Fz

toro1966

Thanks .It's hard to tell from the diagram. I saw that one but thought it might be 7 since that's the cowl panel it came from. What confused me is that it doesn't show the cut our for the hood latch on that piece.

stosch

Take it to a body shop. They carry lots of different clips.

AlinNM

Trying to find a source for these clips, 2013 F150 scuff plate

te clips.