b1collins5

Lol right on sounds good. Just checking. I'm liking the price too.

Summers22

iTrader: (2)

In other videos, they talk about how they have never had a Hylux ballast fail.

J15

HIDs will have slightly better light output but LEDs will be easier to install. Both will be a massive upgrade over stock when installed in a projector housing.

davidvi

I was thinking of getting some anzo switchbacks and the ballast and bulbs you linked too. Will this al be plug and play. Thanks

J15

HIDs almost always require you to run a relay from the battery. Your factory headlight circuit becomes an on/off switch with power coming through the relay.

Summers22

iTrader: (2)

Yes, I would get a relay if you run HID's to the Anzos.

davidvi

Any clarification on that.

+12V from battery to one side of the coil on the relay and the other side of the coil to ground

The origional headlight power wire to the switched leg of the relay . The other side of the switched relay leg to ground.

all the other wires plug into the factory harness? Do i really just need to take the low beam power wire out of the factory harness and hook it up like i said above?

Thanks for all the help.

Summers22

iTrader: (2)

Here is a Morimoto H7 harness: http://www.lightwerkz.net/index.php/...y-harness.html

Summers22

iTrader: (2)

Just saw this on Lightwerkz, Hylux ballasts with Morimoto bulbs and harness, $114

http://www.lightwerkz.net/index.php/...id-system.html

davidvi

awesome. im going to order today. Can you tell me what options to get its kinda confusing. bulb color, bulb type and such, Will i Need the antiflicker?

Also how bright will the be, will on comming traffic be blinded? I have a 2" level kit too

thanks for all your help