Aftermarket wheels/tires setup you have on your 2.5 front lift only
#31
285/65/20 on 20x9 fuel Mavericks. Front is at about 2.5" and rear is stock height
The following users liked this post:
flvol77 (08-10-2021)
#33
Senior Member
Thread Starter
Did that portapower crash bars push out to, @tareed. Still rubbed on mine, worse on full lock reverse. Tired of getting those looks in parking lots....
On -19 with <33in may not as bad as mine, that's why.
On -19 with <33in may not as bad as mine, that's why.
#34
Senior Member
34" tires with RC 2.5 level.........no mods necessary.....
#37
Here is my truck..Its not exactly the setup you're going for but tires measure a little over 33 inches. I have no rubbing and I didnt have to trim anything. Those wheels are a 18mm offset. They stick out just past the fenders.
Autospring 2.5 front level kits with 3in rear blocks
XD Hoss 2 17x9 with 285/70/17 Nitto Terra Grappler G2's
Autospring 2.5 front level kits with 3in rear blocks
XD Hoss 2 17x9 with 285/70/17 Nitto Terra Grappler G2's
#38
Texas A&M Aggie
These measure right at 32.6 and a true 12.5" wide. So I've got a little more clearance height wise, but as far as turning I've got less clearance than you due to the offset and that these are 12.5" wide (lug to lug)
#39
Senior Member
Howdy and Welcome.
Hey, this is the '15 plus forum.
I'm guessing a 2.5" level would leave you a slight rake.
You might get a quicker/better answer in the '08 forum.....
https://www.f150forum.com/f4/
#40
wheels and tires Black Rhino Warlord / Nitto Terra Grappler G2's
2017 F-150 Lariat with Roush stage1 supercharger and 22x10 Black Rhino Warlord Wheels ; 2" leveling and Bushwhacker Extenda fender Flares
Last edited by WRS969; 10-16-2017 at 05:00 PM. Reason: forgot info