Aftermarket POWER FOLDING Tow Mirrors Coming Soon!
#21
There was another thread where someone added F250 mirrors. Why couldn't these work after the harness and module change? http://www.ebay.com/itm/Mirror-Power...-/311611628925
#22
Senior Member
I am hopeful that a stand alone system will come about. Perhaps a kit that includeds a set of mirrors and a master window switch replacement. Might end up being a pipe dream...
#24
The wiring just isn't there for an easy change unless they were turned into a data bus.
#27
At that point, it would be easier just to replace the DDM and PDM as you are into repurposing stock wiring. I have not looked to see if there are different door modules with more IO for 22 pin mirrors. If there is only one module type, then there is a chance one could just add leads to existing connectors and use a 3rd party connector to help keep cost down. But bottom line is there is no way to do power fold with 8 pins while retaining power adjust, EC, heat and indicator light.
The following 2 users liked this post by Truckin:
BigDozer66 (01-11-2018),
UncleG (04-11-2018)
#29
not trying to be a negative Nancy, I just don't see a magic solution from an EE point of view.