Advice: Add factory tow wiring, reverse / backup sensors
#1
Advice: Add factory tow wiring, reverse / backup sensors
I picked up my XLT used, got a killer deal on it, but it came with no hitch or wiring wire connection. I'm going to add on an aftermarket class iv hitch, no big deal there. I'd like to add on the trailer wiring with the in-bumper 7/4 connector, but I haven't figured out what I need besides the harness. Is the install just the harness and drill out the current plastic bumper piece or do I need to install a replacement bumper cover that has a hole or bracket to mount the connectors?
Also has anyone added on a reverse or backup sensing system and do you have recommendations for a factory looking or oem system? Figured while I'm back there, I should do it all.
Also has anyone added on a reverse or backup sensing system and do you have recommendations for a factory looking or oem system? Figured while I'm back there, I should do it all.
#2
Senior Member
iTrader: (1)
I posted a similar question on another forum: http://www.f150ecoboost.net/forum/17...ped-truck.html
I was given the following info to duplicate a factory install (although parts can be acquired for much less online)
Ford Part numbers:
FL3Z-17D826-C: HD hitch asy $355.45
FL3Z-13A576-B: Wiring asy w/ trailer breaks. for the round 5 pin plug $35.57
FU5Z-14489-A: sleeve, Round adapter for wiring asy $32.25
FL3Z-17B807-BA: Bumper cover $72.43
Hope this helps some.
I was given the following info to duplicate a factory install (although parts can be acquired for much less online)
Ford Part numbers:
FL3Z-17D826-C: HD hitch asy $355.45
FL3Z-13A576-B: Wiring asy w/ trailer breaks. for the round 5 pin plug $35.57
FU5Z-14489-A: sleeve, Round adapter for wiring asy $32.25
FL3Z-17B807-BA: Bumper cover $72.43
Hope this helps some.