Adding Lane assist to a 502A
#221
I have no intention of adding APA -- I just want LKA. I will put a button up at the mirror, make it nice looking, and call it done. It will stay on all the time as it has in other/previous cars.
If for some reason it gets annoying, off is a quick nearly hidden button press away.
My mirror should ship tomorrow. Ordered from a dealer in FL that was dealing with Irma. Can't wait... my button showed up today.
If for some reason it gets annoying, off is a quick nearly hidden button press away.
My mirror should ship tomorrow. Ordered from a dealer in FL that was dealing with Irma. Can't wait... my button showed up today.
#222
Senior Member
iTrader: (4)
I have no intention of adding APA -- I just want LKA. I will put a button up at the mirror, make it nice looking, and call it done. It will stay on all the time as it has in other/previous cars.
If for some reason it gets annoying, off is a quick nearly hidden button press away.
My mirror should ship tomorrow. Ordered from a dealer in FL that was dealing with Irma. Can't wait... my button showed up today.
If for some reason it gets annoying, off is a quick nearly hidden button press away.
My mirror should ship tomorrow. Ordered from a dealer in FL that was dealing with Irma. Can't wait... my button showed up today.
My forearms are shredded. It is amazing how sharp plastic can be.
#223
The FORScan Guy
So, here's the summary. It appears that both the configurations work. There are 3 differences that would be handy to know about (what do they control?)
Here's the comparo with the differences between Livnitup's AB and the config that stork says works in 2 different mirrors:
Attachment 533221
Here's the comparo with the differences between Livnitup's AB and the config that stork says works in 2 different mirrors:
Attachment 533221
Edit: let me double-check the settings above, the side of road doesn't seem correct for my truck
Edit #2: hmm, my other software definitely says "8" is "Vehicle is on the left side of the road, oncoming traffic passes to the right." I have to believe Ford wouldn't have set this wrong from the factory in mine and can only conclude my other software is wrong for this bit so I wouldn't take the mapping above with much credence.
Last edited by Livnitup; 09-18-2017 at 06:41 PM.
#224
The FORScan Guy
706-02-02 xxxx x*xx xxxx - C=DTC$500176 General Failure Alignment Suppressed
706-02-02 xxxx x*xx xxxx - F=DTC$500176 General Failure Alignment Fully Enabled
706-04-01 **xx xxxx - 8A=LA Customer Enable LDW and LDW Haptic Intensity Medium
706-04-01 **xx xxxx - 9B=LA Customer Enable LDW/LKA and LDW Haptic Intensity High
** These values are unimportant because they change based on what you set in the IPC menu choices **
706-02-02 xxxx x*xx xxxx - F=DTC$500176 General Failure Alignment Fully Enabled
706-04-01 **xx xxxx - 8A=LA Customer Enable LDW and LDW Haptic Intensity Medium
706-04-01 **xx xxxx - 9B=LA Customer Enable LDW/LKA and LDW Haptic Intensity High
** These values are unimportant because they change based on what you set in the IPC menu choices **
#225
Senior Member
iTrader: (4)
I should also note that my junkyard mirror came from Canada. I didn't think about that until you started posting those values. I don't think it would matter, but I thought you should know.
#226
I'll see what I can dig up on 706-02-02 xxxx x*xx xxxx & 706-04-01 **xx xxxx xx
Edit: let me double-check the settings above, the side of road doesn't seem correct for my truck
Edit #2: hmm, my other software definitely says "8" is "Vehicle is on the left side of the road, oncoming traffic passes to the right." I have to believe Ford wouldn't have set this wrong from the factory in mine and can only conclude my other software is wrong for this bit so I wouldn't take the mapping above with much credence.
Edit: let me double-check the settings above, the side of road doesn't seem correct for my truck
Edit #2: hmm, my other software definitely says "8" is "Vehicle is on the left side of the road, oncoming traffic passes to the right." I have to believe Ford wouldn't have set this wrong from the factory in mine and can only conclude my other software is wrong for this bit so I wouldn't take the mapping above with much credence.
#227
The FORScan Guy
So I was curious about this and started pulling VIN as-builts and it seems 2015-2016's have an 8 but yet I saw some 2017 Super Duties with a 0 and a '17 Platinum with an 8 so maybe it's a firmware difference or that bit doesn't really represent "side of road"???
#228
Interestingly enough, my AHB-equipped 2015 is also set to X8XX in 706-02-01, so whatever it does, I think 8 is the right value. Clearly, that position is all about AHB config.
Thanks again!! Man I can't wait to get my mirror.
Thanks again!! Man I can't wait to get my mirror.