Hopefully we can get stop/go working with just software updates.

Good luck and keep us posted.

 

Anyone have a part # for the metal clips that hold the plastic bumper trim panel on? I lost one down in the abyss of the bumper when I was checking out the CCM. I looked on eBay but all I found were the universal kind and didn't resemble the stock ones with 4 spike prongs.

 

Damn. I hate it when that happens. I just got an order from Tasca of every clip type I could (three), let me take some photos. I'd be happy to mail you a few, if one fits the bill.

 

Did you try a dealer. Mine has a miscellaneous bin from leftover parts.

 

No, just figured I'd try to find the right part and order a bag of them so I'd have some on hand since I'll be removing this trim piece again and knowing me I'll goof again.

 

Does the bumper have to be removed to do this or just pop off the black plastic bumper pieces?

 

You just pop off the black piece to get at the CCM. The problem is those clips -- the tangs bend each time, and then have to be re-bent back. After a few times, they're toast and fall off or break.

 

Either of these look right? Both have the spike prongs.

 

The one on the left looks like it from what I can tell by that profile pic. It's definitely not the one on the right.

 

PM me if you would like me to send you one. It took me awhile to hunt down the part numbers. For anyone else interested:

W714030-S424 larger metal clip on the left of the photo with the flares
W710338-S424 metal clip on the right of photo

W714972-S300 are the white plastic clips that hold the whole interior together