Adaptive Cruise Control *Added*
Looks like success so far.
Made all the changes with Forscan and now the only DTC's I'm getting are related to the C-CM not being calibrated.
Stopped for supper and will try a cal afterwards.
Made all the changes with Forscan and now the only DTC's I'm getting are related to the C-CM not being calibrated.
Stopped for supper and will try a cal afterwards.
Thread Starter
Member
Joined: Jan 2017
Posts: 58
Likes: 72
Originally Posted by Great white
Looks like success so far.
Made all the changes with Forscan and now the only DTC's I'm getting are related to the C-CM not being calibrated.
Stopped for supper and will try a cal afterwards.
Made all the changes with Forscan and now the only DTC's I'm getting are related to the C-CM not being calibrated.
Stopped for supper and will try a cal afterwards.
I've got it in and calibrated.
But still have something wrong. There is no response to the cruise buttons and adaptive can't be selected in the settings.
It's either in the IPC or the C-CM. each is throwing a code that something is wrong with the other. I'm betting I have something not quite right in the IPC.
Some screen grabs:
My vin hex works out to: 31 46 54 46 57 31 45 47 38 47 46 43 30 38 31 30 36 (1FTFW1EG8GFC08106), so unless forscan is making a checksum error the c-cm should be good to go.
I'm so close I can taste it, and I think that's exactly why I can't see the problem: I'm too close to it. Forest through the trees type thing.
I was worried maybe I had ordered the wrong module for build date, but my truck is 28/4/16 and I confirmed my module was ordered for after 8/4/16.
I've fired a PM off to livnitup to see if he has any ideas where to go next...little lost right now. Any ideas appreciated.
But still have something wrong. There is no response to the cruise buttons and adaptive can't be selected in the settings.
It's either in the IPC or the C-CM. each is throwing a code that something is wrong with the other. I'm betting I have something not quite right in the IPC.
Some screen grabs:
My vin hex works out to: 31 46 54 46 57 31 45 47 38 47 46 43 30 38 31 30 36 (1FTFW1EG8GFC08106), so unless forscan is making a checksum error the c-cm should be good to go.
I'm so close I can taste it, and I think that's exactly why I can't see the problem: I'm too close to it. Forest through the trees type thing.
I was worried maybe I had ordered the wrong module for build date, but my truck is 28/4/16 and I confirmed my module was ordered for after 8/4/16.
I've fired a PM off to livnitup to see if he has any ideas where to go next...little lost right now. Any ideas appreciated.
Last edited by Great white; Mar 18, 2017 at 11:40 PM.
Out freaking standing!
It's 0140 here right now but I just couldn't stand it. Housecoat on and out to the truck.
It took inputting all the changes to get the truck to accept it, but looks like adaptive is functional! Responds to the steering buttons and I get the proper graphics on the cluster.
Thank you very much, I'll be able to sleep tonight...errr, this morning.
Looks like I'm #2 to add adaptive cruise.
Full functional test tomorrow!
Back to bed now.....
It's 0140 here right now but I just couldn't stand it. Housecoat on and out to the truck.
It took inputting all the changes to get the truck to accept it, but looks like adaptive is functional! Responds to the steering buttons and I get the proper graphics on the cluster.
Thank you very much, I'll be able to sleep tonight...errr, this morning.
Looks like I'm #2 to add adaptive cruise.
Full functional test tomorrow!
Back to bed now.....
Last edited by Great white; Mar 19, 2017 at 01:10 AM.
