Not to sidetrack this, but I noticed a few posts regarding temps above gauges. Does this mean it will display the actual temp above the gauge? Such as trans temp above the trans gauge?

I had tried that when setting up other things with Forescan, but it just replaced the turbo gauge with the trans gauge.

 

Nobody needs to change anything at 720-07-01 for ACC to work. Unless you want to add temps above gauges, keep what your as-built is for 720-07-01. Storkpkp changed these values at 720-07-01 before the ACC mod and didn't notice the DTC until he was doing the ACC mod and putting these values back to his as-built cleared the DTC.

 

Yes, it will add temps above trans & engine gauge.
Edit: if you want to pm me your current value at 720-07-01 I'll tell you what to change it to.

 

I set off my collision warning this morning. I did it on purpose and it still scared the poop out of me!!!!!

 

SWEET, thats what I was hoping it would do. I'll PM them tonight when I get home(if I remember).

 

Make sure you pick the right harness, I ended up with the one without intercooler shutter plugs (5.0 harness) and had to marry my existing and new harnesses together.

 

Both part numbers are in the spreadsheet by the way.

 

Doesn't mean the parts guy can tell a B from an F, and if you don't check before tearin into your truck...Just sayin

 

Not sure what you mean by this. Are you not ordering your parts?
The harness comes with a part number on it as well and the ecoboost harness has 2 extra connectors.

 

Yea, I ordered the harness that ends with a B and got the harness with an F.
Eg. ordered FL3Z-15K867-B, But got FL3Z-15K867-F. Didn't check before I tore into truck 'cause figured parts guy could read enough to give right part