Adaptive Cruise Control *Added*
Senior Member
Joined: Jan 2014
Posts: 186
Likes: 24
I was getting it on IPC only.... WAS is the key word here.
I compared my IPC data with the data @thematrixhazuneo was nice enough to offer and fixed my issue.
What I found was that I had the Off-road Power Distribution screen enabled & he didn't.... The bit code I had was 720-07-01-8401-8xxx while the bit code he had was 720-07-01-8401-0xxx
Once I changed my bit to 0 I no longer have ANY DTC's in my IPC
I would have never thought that screen would cause the issue, but it makes since... the TCCM was looking for off-road data that the truck couldn't give it
I compared my IPC data with the data @thematrixhazuneo was nice enough to offer and fixed my issue.
What I found was that I had the Off-road Power Distribution screen enabled & he didn't.... The bit code I had was 720-07-01-8401-8xxx while the bit code he had was 720-07-01-8401-0xxx
Once I changed my bit to 0 I no longer have ANY DTC's in my IPC
I would have never thought that screen would cause the issue, but it makes since... the TCCM was looking for off-road data that the truck couldn't give it
When you say your 302A had all of the wires on the front harness except the power wire, are you saying the plug for the CCM was already there?
5 Year Member
Joined: Oct 2014
Posts: 524
Likes: 91
From: Florida
So I was able to get the DTC for the ABS cleared with the help of Livinitup. I placed a 3 in the ABS line in lieu of a 7 and was able to clear the DTC. I still have a DTC for the TCCM popping up in the IPC, but we are working on it.
I am pretty sure this stems from my truck being a RWD and not 4x4.
I am pretty sure this stems from my truck being a RWD and not 4x4.
Senior Member
Joined: Jan 2014
Posts: 186
Likes: 24
the only wire m8ssing was the dedicated power hence the power mod and tapping off the switched 12v from the bov or grille power(solid gray wire)
I wish I would have taken pictures in hindsight with a writeup as it would have helped others.
Last edited by thematrixhazuneo; Aug 22, 2017 at 09:10 PM.
If I set my abs 760-03-01 to 7XXX, then I get the same TCCM DTC in ABS. If I set it to 3XXX it goes away.
My IPC error came from when I added the Temps above my Trans and Engine Gauges using 720-07-01 set to 8409 8E50 60FA from the spreadsheet. I already had to set one bit here for my Trailer Brake and then when i changed this it threw a DTC.
My IPC error came from when I added the Temps above my Trans and Engine Gauges using 720-07-01 set to 8409 8E50 60FA from the spreadsheet. I already had to set one bit here for my Trailer Brake and then when i changed this it threw a DTC.