Delete

 

Yes for the harness you need.

 

So I was able to get the DTC for the ABS cleared with the help of Livinitup. I placed a 3 in the ABS line in lieu of a 7 and was able to clear the DTC. I still have a DTC for the TCCM popping up in the IPC, but we are working on it.

I am pretty sure this stems from my truck being a RWD and not 4x4.

 

do you have XLT? Mine is 4x2 and I don't get any codes. I'll have to check and see what I have for asbuilt.

 

No, I have a Lariat.

 

Can you or someone write this power wire step up so I can add it to the document before I note the steps are good to go for 302As?

 

If you get the TCCM DTC figured out let me know... I have the same thing on my RWD XLT

 

For some reason the PMs are not showing as SENT. In case you didn't get them here is my message.

Yeah I have the 8" Cluster

This is my current IPC I have also added my current ABS as well. I did add the hill descent switch as well FYI. This is on a 2015 XLT 302a Oct build. Let me know if you need any thing else.

And I DO NOT get any DTCs

IPC

;Block 1
72001010F0B30646037
7200102201750B1
;Block 2
72002014DC03C303CDF
72002021000A1DC
;Block 3
72003012805540000AC
7200302C848013D
;Block 4
7200401E4C1000000D1
7200402555300D5
;Block 5
720050100000000002D
720050200000937
;Block 6
720060100000000002E
72006020000002F
;Block 7
720070184010E506072
720070200000030

ABS

;Block 1
76001013146544557D0
76001023143503946AD
76001034B45393836A2
76001043231CF
;Block 2
76002013111110000BD
76002020000006B
;Block 3
76003017E00E9

 

Will do. Are you getting it on the ABS and the IPC or just the IPC?

I was able to clear it from the ABS and have some steps to try tonight to get rid of it in the IPC.

 

I was getting it on IPC only.... WAS is the key word here.

I compared my IPC data with the data @thematrixhazuneo was nice enough to offer and fixed my issue.

What I found was that I had the Off-road Power Distribution screen enabled & he didn't.... The bit code I had was 720-07-01-8401-8xxx while the bit code he had was 720-07-01-8401-0xxx

Once I changed my bit to 0 I no longer have ANY DTC's in my IPC

I would have never thought that screen would cause the issue, but it makes since... the TCCM was looking for off-road data that the truck couldn't give it