Originally Posted by Madcap57

OldManFord

Originally Posted by TexasFording

Looks good, great write up to you and all the guys who contributed. Just, if I may be pendantic, its not just for 502s, it works on 302s as well, so maybe rename it to just 2015 F150s?

Any case, great work to all, great mod and great bang for the buck

Originally Posted by thematrixhazuneo

2015 XLT 302a here.

Finished install and everything works without any DTCs!
Thank you so much for those that helped start this project and livinitup for his help in the forscan programming and calibration. Definitely would have been a "wish I could" mod if you guys aren't here!

I wanted to ask how the collision warning is triggered. I tried an empty box and driving 5+mph. Nothing happens to my HUD(does light up at initial start) or sound plays. I do have the option in my pic.

do I need to add another fuse somewhere to have it do something?

thanks all!

Originally Posted by storkpkp

Yeah I wasn't sure about that. I thought the 392 guys had to make some extra wiring mods. Am I wrong?

Originally Posted by Griffalo

Morgan, thanks for taking the lead on doing this!!! Great job!!!! BMan, great write-up on how to do this!!!

Now for my question. Someone had asked earlier if this could be done on a 501a that doesn't have the HUD connector and have it still work. Was this ever determined to be doable thing or is there something else that needs to be done to make it work? I have a 16 Lariat 501a package but it does not have the HUD connector in the dash. Not having the HUD is not a deal breaker, as I don't want to have to pull the dash to replace the wiring harness, but the ACC would be great to have. My g/f has it on her Jeep Cherokee TrailHawk and it is great for highway driving.

Thanks for all your wisdom on this!!!

Originally Posted by TexasFording

I dont know if it will work without the HUD, you'll get DTCs

Originally Posted by cwcb08

won't be to hard to get the wires required up there

Just need two power wires a ground and hs2 +/-

They should be able to tap all of those from existing wires under the dash

Originally Posted by thematrixhazuneo

My 302a had the hud plug from factory. I also had all the wires on the front harness except the power wire. Thus I had to do the "power mod". Other than that everything works perfectly.

Originally Posted by storkpkp

Ok, I will change the name of the guide, but will make a note that there is a slight mod necessary. Do you have a write up on that?

Originally Posted by Firerunner

Where are you getting this info from?