I see all of that, even the IPC

 

Ok, then it's got to be wiring and/or a bad CCM.

 

I don't have pics, but I connected to the CCM power wire with a positap--it taps the wire you're connecting to without cutting or splicing. C134 is, IIRC, the harness connector that you're putting in the truck that connects to the foglight and the CCM.

 

So the OBDLink MX Bluetooth won't do it then? Not that I would know where to get the firmware anyway.

 

No, it's not fast enough and FORScan would refuse to even try with it connected.

 

Man the ACC part number saved my rear! I bought a Raptor steering wheel for my 2014 Tremor I'm trying to adapt and was looking to see if I had to buy a full wheel as mine was non adaptive cruise.
Hoping to get it to work with my truck!

 

Been lurking on this tread for a few weeks and Just want to say thanks for all the work and informations! ACC is added and functional! WootWoot! now on to upfitter switches!

 

Did you ever get your problem sorted?

 

I have not. I can not figure what is wrong and the part company will not setback with me about trying to replace the CCM

 

Ok.... I had the same exact problem. I was about to set my truck on fire. Lol. The problem is a ground. The harness on the truck side did not have the ground wire in it so I had to run a separate ground to the plug at the CCM. Im not sure which pin it is but I think it's pin #1 on the truck side of the harness.