Adaptive Cruise Control *Added*
Qucik question for you if you don't mind another.
Do you have a screen in your advanced settings to choose adaptive cruise or normal?
I had this screen a couple times while trying different values, but now only have a sensitivity selection for collision avoidance.
It was my understanding that adaptive cruise trucks had the ability to turn adaptive on or off. If there is another screen, I've still got a value "off" somewhere....I've got a couple ideas where it might be in the IPC...
Do you have a screen in your advanced settings to choose adaptive cruise or normal?
I had this screen a couple times while trying different values, but now only have a sensitivity selection for collision avoidance.
It was my understanding that adaptive cruise trucks had the ability to turn adaptive on or off. If there is another screen, I've still got a value "off" somewhere....I've got a couple ideas where it might be in the IPC...
Senior Member
Joined: Oct 2012
Posts: 965
Likes: 102
I've got it in and calibrated.
But still have something wrong. There is no response to the cruise buttons and adaptive can't be selected in the settings.
It's either in the IPC or the C-CM. each is throwing a code that something is wrong with the other. I'm betting I have something not quite right in the IPC.
My vin hex works out to: 31 46 54 46 57 31 45 47 38 47 46 43 30 38 31 30 36 (1FTFW1EG8GFC08106), so unless forscan is making a checksum error the c-cm should be good to go.
I'm so close I can taste it, and I think that's exactly why I can't see the problem: I'm too close to it. Forest through the trees type thing.
I was worried maybe I had ordered the wrong module for build date, but my truck is 28/4/16 and I confirmed my module was ordered for after 8/4/16.
I've fired a PM off to livnitup to see if he has any ideas where to go next...little lost right now. Any ideas appreciated.
But still have something wrong. There is no response to the cruise buttons and adaptive can't be selected in the settings.
It's either in the IPC or the C-CM. each is throwing a code that something is wrong with the other. I'm betting I have something not quite right in the IPC.
My vin hex works out to: 31 46 54 46 57 31 45 47 38 47 46 43 30 38 31 30 36 (1FTFW1EG8GFC08106), so unless forscan is making a checksum error the c-cm should be good to go.
I'm so close I can taste it, and I think that's exactly why I can't see the problem: I'm too close to it. Forest through the trees type thing.
I was worried maybe I had ordered the wrong module for build date, but my truck is 28/4/16 and I confirmed my module was ordered for after 8/4/16.
I've fired a PM off to livnitup to see if he has any ideas where to go next...little lost right now. Any ideas appreciated.
did you try different SCCM values at 724-03-01?
Nope. But, it's working now with the new IPC values. No DTC's, it's all clean.
Just have to figure out why I don't have a "cruise control" screen in the advanced settings. I've still got a value off somewhere as it's on adaptive cruise all the time with no option to turn it off to "normal" cruise.
Senior Member
Joined: Oct 2012
Posts: 965
Likes: 102
Nope. But, it's working now with the new IPC values. No DTC's, it's all clean.
Just have to figure out why I don't have a "cruise control" screen in the advanced settings. I've still got a value off somewhere as it's on adaptive cruise all the time with no option to turn it off to "normal" cruise.
Just have to figure out why I don't have a "cruise control" screen in the advanced settings. I've still got a value off somewhere as it's on adaptive cruise all the time with no option to turn it off to "normal" cruise.
Member
Joined: Feb 2016
Posts: 129
Likes: 35
From: Canada
Just noticed the comment about the CCM module having 3 different versions, based on build date. Could you throw the part numbers up for the 3 different versions and corresponding build dates they go with? My truck had a February or March 2016 build date so I'm guessing I may need a different module than you?
Also, is it possible to change out the wiring harness without removing the front bumper (obviously is easier to do with bumper off).
Also, is it possible to change out the wiring harness without removing the front bumper (obviously is easier to do with bumper off).
Just noticed the comment about the CCM module having 3 different versions, based on build date. Could you throw the part numbers up for the 3 different versions and corresponding build dates they go with? My truck had a February or March 2016 build date so I'm guessing I may need a different module than you?
Also, is it possible to change out the wiring harness without removing the front bumper (obviously is easier to do with bumper off).
Also, is it possible to change out the wiring harness without removing the front bumper (obviously is easier to do with bumper off).
Bumper has to come off. No way around it. Not unless you have the hands of a 2 year old and 3 foot long arms that is....
Last edited by Great white; Mar 20, 2017 at 10:08 AM.
Thread Starter
Member
Joined: Jan 2017
Posts: 58
Likes: 72
Originally Posted by Great white
Got it.
720-01-01: XDXX-XXXX-XXXX
Changed to XFXX-XXXX-XXXX and now have "Cruise" options in advanced settings.
At this point, I'm calling adaptive cruise complete!
720-01-01: XDXX-XXXX-XXXX
Changed to XFXX-XXXX-XXXX and now have "Cruise" options in advanced settings.
At this point, I'm calling adaptive cruise complete!
