Adaptive Cruise Control *Added*
#761
Senior Member
Hold on, out in my truck now trying some values...
Edit: Try this: 760-03-01 3xxx xx
This seems to be the binary bit breakdown for 760-03-01 *xxx xx:
0000 - bold bit is: 0=Hill Start Assist disabled, 1=Hill Start Assist enabled
0000 - bold bit is: 0=ACC disabled, 1=ACC enabled
0000 - bold bit is: 0=Collision Warning not avail, 1=Collision Warning avail
So:
760-03-01 3xxx xx = ACC enabled & Collision Warning available (3 in hex=0011 binary)
760-03-01 7xxx xx = Hill Start Assist enabled, ACC enabled & Collision Warning available (7 in hex=0111 binary)
Edit: Try this: 760-03-01 3xxx xx
This seems to be the binary bit breakdown for 760-03-01 *xxx xx:
0000 - bold bit is: 0=Hill Start Assist disabled, 1=Hill Start Assist enabled
0000 - bold bit is: 0=ACC disabled, 1=ACC enabled
0000 - bold bit is: 0=Collision Warning not avail, 1=Collision Warning avail
So:
760-03-01 3xxx xx = ACC enabled & Collision Warning available (3 in hex=0011 binary)
760-03-01 7xxx xx = Hill Start Assist enabled, ACC enabled & Collision Warning available (7 in hex=0111 binary)
#762
The FORScan Guy
#763
Senior Member
Thanks again. Love acc so far.
#764
I have my front bumper Line-Xed. Would I still be able to add this? Will the Line X interfere with the radar sensor at all? Sorry if this has already been asked. I only made it to page 40 of this thread and I kinda want in on this.
#765
Senior Member
I doubt it would bother it. The sensor sits behind the plastic piece.
#767
Senior Member
#768
Senior Member
Don't think he will jump at it now.
#769
The plastic insert was separated before it was sprayed, so I can still remove it. Looks like I might have to put some serious thought into doing this. Especially with it all done with FORSCAN mods. Thanks to all who contributed to this thread. Looks like a fun little project.
#770
Senior Member
The plastic insert was separated before it was sprayed, so I can still remove it. Looks like I might have to put some serious thought into doing this. Especially with it all done with FORSCAN mods. Thanks to all who contributed to this thread. Looks like a fun little project.
Outside of that it was easy. Just take your time.
The following users liked this post:
vtn98 (09-27-2017)