6R80 to 10R80
#1
Member
Thread Starter
6R80 to 10R80
I wonder if it would be possible to swap out a 6 speed for the 10 speed auto trans?
I presume it would be straight forward mechanically, but I wonder about the electronics/computer/etc.
The things that make me go hmmm....
I presume it would be straight forward mechanically, but I wonder about the electronics/computer/etc.
The things that make me go hmmm....
#3
Senior Member
#4
I have some windmills for you, Don...
#6
Ha. Wonder what one costs.
Trending Topics
#8
Member
Thread Starter
Well...They run about $1,500 for a used one out of a wrecked 2018 donor vehicle from the local auto parts recycler. I have a 2017 5.0 Screw 4x4 so it should just bolt up (huge ASSumption here).
If the wiring harness was similar and we could work a little Forscan magic on the pcm etc. you could potentially have a significantly more fuel efficient truck...
....just sayin
If the wiring harness was similar and we could work a little Forscan magic on the pcm etc. you could potentially have a significantly more fuel efficient truck...
....just sayin
#9
Old Fart
Not a modding expert, but I am guessing you will need to swap out the productivity screen as it only displays 6 gears, not 10.
#10
Senior Member
Did the 5.0 change for 2018, though? If so, the assumption that it will bolt up might not hold. Otherwise, I'd expect that the simplest path would be to swap the relevant control modules as well as the transmission from the donor.