-25 offset wheels driveAble?
#41
Okay so you basically have my setup even though my rims are 20x10 since my tires are 33x12.5 it's basically the same. And you are on a 2.5" level? ... can I get away with only trimming a little of the fronts in your opinion or even just spreading them? Or did it run that much that it needed complete removal?
#42
Originally Posted by F150Sport44
Okay so you basically have my setup even though my rims are 20x10 since my tires are 33x12.5 it's basically the same. And you are on a 2.5" level? ... can I get away with only trimming a little of the fronts in your opinion or even just spreading them? Or did it run that much that it needed complete removal?
Yes I had a 2.5 level and also had to trim the plastic piece up against the cab if I remember right. I also ran 22x10 with Nitto trail 34.5 and had to trim some more on that can piece.
#43
More of an issue with the wife who actually surprised me with the wheels/tires for our anniversary but doesn't want me cutting out the crashbars. You think I could get away with spreading or swapping them?
#44
I think if I went with a 295/55 tire instead itll clear with just bending the bars ... the 295/55 is 32.8 diameter and 11.6 width. So that's .2 less diameter and almost an inch less width than my 33x12.5
#46
Yea I guess that's my best bet ... I just figured if I go to the tire shop tomorrow and have them put them on and they don't fit then I have to deal with taking them off and getting stock tires put back on the wheels to be able to drive again :/
#47
Why not just mount them up...drive home(maybe austin powers golf cart style) get a sawzall, metal blades and modify the front crash bars pretty sure you wont have a problem with rears...I know completely different sizes but, just make it fit is my vote Deep lip wheels are worth it . i had to trim about 2.5 inches off mine When i put my 22x14s -76 offsets on my truck. I knew id have to do some trimming. Even with a 7 inch lift.
#49
My plan is to spread them tomorrow , go to the shop and have them put on. Hopefully no rubbing, if there is rubbing hopefully it's minimal that I can just trim an inch or two off the far side of the front crash bars and call it a day