sorry read the wrong line. I originally ordered the HUD. Already edited post. No 2019 does not use HUD

 

thanks for the update KR2014 and I did the same when copying part numbers on a spreadsheet.

I put together what it would cost me. I used two sites that others suggested in the other post. I may do some further price checks but I would rather buy from one site than to piece meal the purchase. Now they suggested using either ones listed below. I have Lariat with the 502A package with the Technology package and I don't need the IPMA camera since lane assist and other features that use the front camera but these sites don't sell it so it may be a dealership purchase which will be more expensive. I don't know if these sites are charging for taxes or shipping but they both came out close where Fairway was only $15 more. But I came up with 928.83 in parts to do this project.

I will be waiting for the ForScan information as well as procedures. The IDS process is the only question I would have whether I would need to go to the dealership to set. I am currently in process of leveling my truck so I will be waiting to have that process done after leveling it. I don't know if that would make a huge difference or not. I don't know if anyone who has ACC and leveled their truck had to get it recalibrated.


https://www.fairwayfordparts.net
https://www.tascaparts.com

 

That IPMA is an Engineering number from Ford its just an easy reference to see if your part matches.
The actual part number for the IPMA is
KL3Z-19G490-A

 

Thanks I just checked that part and that is an additional 569. Fairway parts sold it .53 cheaper..

 

FYI, White Bear Lake has the cheapest parts over all coming in at 912.17

https://parts.autonationfordwhitebearlake.com

 

FYI there is a TSB from 2/2019 for ACC for the following vehicles

Is a 2015-2016 F-150 built on or before 01-Feb-2016, a 2019 F-150 built on 11-Oct-2018 and through 15-Nov-2018 or a 2019 F-Super Duty built on 10-Oct-2018 and through 27-Nov-2018

if you are planning on adding this and your 2019 falls in these parameters you will need to get a new front bumper panel.

https://ford.oemdtc.com/4398/adaptiv...9-f-super-duty

 

I also have a 2019 Lariat 502A package but without the Technologie package. How complicated, if possible, to add the camera? What does IPMA stand for?

 

You already have the IPMA. (image Processing Module A) Its what controls the auto highbeam. You more than likely just need to change the Data for it in forscan. Try that before you buy a new one. Also, you can add Lane keep assist just by changing the Values in Forscan.

 

delete

 

Is it really that easy to add Lane Keep Assist? Do you have a link that details the forscan change needed to do this? I have just got a 2019 Lariat with auto high beams and forward collision avoidance and wondered if this would be possible/easy to add.